Author Index

A

  • Abbasian, Mojtaba Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Abbasian-Peykani, Homa Evaluation of photo-aging changes in mechanical properties of HIPS, PS-based binary and compatibilized ternary blends [(Articles in Press)]
  • Abdi, Lokmane-Taha Effect of quenching temperature and filler rate on the mechanical thermal and physical properties of composites: Polypropylene/calcium carbonate [Volume 11, Issue 1, 2024, Pages 11-19]
  • Abdolahzadeh, Tohid Preparation and characterization of nano WO3/Bi2O3/GO and BaSO4/GO dispersed HDPE composites for X-ray shielding application [Volume 9, Issue 2, 2022, Pages 73-83]
  • Abdollahi, Mahdi Synthesis and identification of polystyrene via conventional and controlled radical polymerization methods: Effect of temperature, initiator and transfer agent on molecular weight and reaction rate [Volume 6, Issue 1, 2019, Pages 85-94]
  • Abdul Rahman, Mohd Rizal Ethylene yield in a large-scale olefin plant utilizing regression analysis [Volume 8, Issue 2, 2021, Pages 105-113]
  • Abdul Rahman, Mohd Rizal Propylene yield from naphtha pyrolysis cracking using surface response analysis [Volume 9, Issue 1, 2022, Pages 15-24]
  • Abedini, Hossein Production of titanium tetrachloride (TiCl4) from titanium ores: A review [Volume 4, Issue 2, 2017, Pages 149-173]
  • Abedini, Hossein Polymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology [Volume 5, Issue 2, 2018, Pages 111-123]
  • Abedini, Hossein Kinetic study on liquid propylene polymerization using a modified heat flow reaction calorimeter [Volume 8, Issue 2, 2021, Pages 123-133]
  • Abedini, Reza Fabrication and performance evaluation of mixed matrix membrane comprising Pebax and graphene hydroxyl in olefin/paraffin separation [(Articles in Press)]
  • Aberoomand-Azar, Parviz Removal of methylene blue dye from aqueous solutions by a new wood/plastic composite based on HDPE and wood particles [Volume 10, Issue 1, 2023, Pages 27-33]
  • Abiz, Ahmadreza Radiation shielding characteristics of HDPE/tungsten oxide nanocomposites reinforced with graphene oxide and LDPE using Geant4, XCOM and experiment [Volume 11, Issue 3, 2024, Pages 199-211]
  • Adachi, Kenta Origin of catalytic activity differences between phosphine and phosphine oxide-based structures in the water-crosslinkable polyalkoxysilane composition [Volume 8, Issue 1, 2021, Pages 49-62]
  • Ahmadi, Ali Effect of process parameters on tensile strength of welds and modeling of laser welding of PA6/NBR/clay nanocomposite by response surface methodology [Volume 7, Issue 2, 2020, Pages 99-110]
  • Ahmadi, Ebrahim Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Ahmadi, Mostafa Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Ahmadi, Mostafa Interplay of reversible chain transfer and comonomer incorporation reactions in coordination copolymerization of ethylene/1–hexene [Volume 7, Issue 1, 2020, Pages 1-11]
  • Ahmadi, Shervin Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer [Volume 4, Issue 1, 2017, Pages 137-147]
  • Ahmadi, Shervin Preparation and characterization of nano WO3/Bi2O3/GO and BaSO4/GO dispersed HDPE composites for X-ray shielding application [Volume 9, Issue 2, 2022, Pages 73-83]
  • Ahmadjo, Saeid Synthesis of high molecular weight polyethylene using FI catalyst [Volume 1, Issue 1, 2014, Pages 25-32]
  • Ahmadjo, Saeid Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Ahmadjo, Saeid Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Ahmadjo, Saeid Interplay of reversible chain transfer and comonomer incorporation reactions in coordination copolymerization of ethylene/1–hexene [Volume 7, Issue 1, 2020, Pages 1-11]
  • Ahmadjo, Saeid Polymerization of methyl methacrylate using bis(imine)cobalt, a polyolefin catalyst [Volume 10, Issue 2, 2023, Pages 79-88]
  • Ahmadjo, Saeid Homo- and co-polymerization of polar and non-polar olefinic monomers using bicenter cobalt-diimine catalysts [Volume 11, Issue 2, 2024, Pages 125-136]
  • Ahsani, Mina Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance [Volume 4, Issue 2, 2017, Pages 175-189]
  • Akbari, Ali Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 201-212]
  • Akbari, Somaye Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid [Volume 4, Issue 2, 2017, Pages 213-220]
  • Akrami, Hamidreza Foam rotational molding of hybrid polyethylene nanocomposites: synergistic effect of microtalc and nanoclay [Volume 9, Issue 2, 2022, Pages 129-138]
  • Al-Rawashdeh, Manal Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour bio-composites [Volume 9, Issue 1, 2022, Pages 1-14]
  • Alamdari, Parisa Exploring the possibility of chemisorption of ethylene on graphene with and without defects [Volume 10, Issue 2, 2023, Pages 101-115]
  • Alavi, Seyed Mahdi Preparing a modified and promoted homogeneous titanium catalyst for ethylene dimerization to butene-1 [Volume 11, Issue 2, 2024, Pages 103-113]
  • Ali, Alikhani Effect of NH3/methylaluminoxane/dodecylamine modifiednanoclay on morphology and properties of polyethylene/ clay nanocomposites prepared by in-situ polymerization [Volume 5, Issue 2, 2018, Pages 125-139]
  • Alidadi-Shamsabadi, Marzie Melt free-radical grafting of glycidyl methacrylate (GMA) onto EPDM backbone and effect of EPDM-g-GMA on the morphology and mechanical properties of PS/EPDM/PA6 ternary blends [Volume 8, Issue 1, 2021, Pages 1-9]
  • Alidadi-Shamsabadi, Marzieh Evaluation of photo-aging changes in mechanical properties of HIPS, PS-based binary and compatibilized ternary blends [(Articles in Press)]
  • Alihosseini, Afshar Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles [Volume 7, Issue 1, 2020, Pages 13-24]
  • Alihosseini, Afshar Permeability and selectivity prediction of poly (4-methyl 1-pentane) membrane modified by nanoparticles in gas separation through artificial intelligent systems [Volume 7, Issue 2, 2020, Pages 91-98]
  • Alizadeh, Reza Dual-templated synthesis of Si-rich [B]-ZSM-5 for high selective light olefins production from methanol [Volume 8, Issue 2, 2021, Pages 93-103]
  • Aljnaid, Malek Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour bio-composites [Volume 9, Issue 1, 2022, Pages 1-14]
  • Allahverdiyeva, Khayala Structure and kinetic regulations of PP-R/PPH-g-MAH/Al(OH)3 based nanocomposites crystallization [Volume 11, Issue 4, 2024, Pages 243-253]
  • Alshammari, Haif Dissymmetric dinuclear transition metal complexes as dual site catalysts for the polymerization of ethylene [Volume 1, Issue 2, 2014, Pages 107-116]
  • Alt, Helmut G. The effect of iodo substituents in bis(phenoxyimine) zirconium complexes on the catalytic performance of homogeneous ethylene polymerization reactions [Volume 5, Issue 2, 2018, Pages 157-165]
  • Alt, Helmut G. Homogeneous and heterogeneous oligomerization reactions of olefins with unbridged metallocene catalysts [Volume 6, Issue 2, 2019, Pages 107-116]
  • Alt, Helmut G. Halogen substituted iron(III) di(imino)pyridine complexes as catalysts for 1-pentene/1-hexene co-oligomerization reactions [Volume 7, Issue 2, 2020, Pages 79-89]
  • Alt, Helmut G. Dissymmetric dinuclear transition metal complexes as dual site catalysts for the polymerization of ethylene [Volume 1, Issue 2, 2014, Pages 107-116]
  • Alt, Helmut G. Intelligent catalysts for ethylene oligomerization and polymerization [Volume 2, Issue 1, 2015, Pages 17-25]
  • Amantes, Bruno In situ stabilization of polypropylene by lignin using a Ziegler-Natta catalyst [Volume 1, Issue 1, 2014, Pages 17-24]
  • Amirabedi, Parya CO2 absorption through PP/fSiO2 nanocomposite hollow fiber membrane contactor [Volume 9, Issue 1, 2022, Pages 61-71]
  • Anarjani, Sattar Anti-fouling behaviors of surface functionalized high density polyethylene membrane in microfiltration of bovine serum albumin protein [Volume 4, Issue 1, 2017, Pages 13-26]
  • Arabi, Hassan Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Arabi, Hassan Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization [Volume 2, Issue 2, 2015, Pages 121-133]
  • Arabi, Hassan Tailoring polypropylene properties by package of internal/external donor in Ziegler Natta catalysts [Volume 11, Issue 4, 2024, Pages 255-263]
  • Araujo, Rafael In situ stabilization of polypropylene by lignin using a Ziegler-Natta catalyst [Volume 1, Issue 1, 2014, Pages 17-24]
  • Armanmehr, Mohammad Hasan Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Arzoumanidis, Gregory G. Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process [Volume 1, Issue 2, 2014, Pages 131-137]
  • Asadi Shahidi, Saeid Determination of gel content of silane cross-linked polyethylene copolymers using FTIR technique [Volume 11, Issue 1, 2024, Pages 1-10]
  • Atsumi, Takashi Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Aydin, Ismail Quantifying compositional and physical properties of antimicrobial polyethylene food packaging films using natural and sustainable fillers and additives [(Articles in Press)]
  • Azdast, Taher Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models [Volume 6, Issue 1, 2019, Pages 13-21]
  • Azdast, Taher Changes in signal transmission speed in coaxial cables through regulating the foam structure of the polyethylene dielectric section [Volume 8, Issue 1, 2021, Pages 41-48]
  • Azdast, Taher Foam rotational molding of hybrid polyethylene nanocomposites: synergistic effect of microtalc and nanoclay [Volume 9, Issue 2, 2022, Pages 129-138]
  • Azizi, Hamed An investigation on non-isothermal crystallization behavior and morphology of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites [Volume 2, Issue 2, 2015, Pages 99-108]

B

  • Babaei, Amir Rheological, thermal and tensile properties of PE/nanoclay nanocomposites and PE/nanoclay nanocomposite cast films [Volume 5, Issue 1, 2018, Pages 47-58]
  • Babkina, Olga N. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Bagheri, Reza Controlling the rheological behavior of nucleated polypropylene via incorporating dimethylbenzylidene sorbitol (DMDBS) masterbatch [Volume 10, Issue 1, 2023, Pages 21-26]
  • Bagheri, Rohollah Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber [Volume 3, Issue 2, 2016, Pages 69-77]
  • Bahrami Reyhan, Sajjad Preparing a modified and promoted homogeneous titanium catalyst for ethylene dimerization to butene-1 [Volume 11, Issue 2, 2024, Pages 103-113]
  • Bahri-Laleh, Naeimeh Polyolefin and olefin production in Iran: Current and future capacities [Volume 3, Issue 1, 2016, Pages 11-22]
  • Bahri-Laleh, Naeimeh Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization [Volume 4, Issue 2, 2017, Pages 253-262]
  • Bahri-Laleh, Naeimeh Kinetic and microstructural studies of Cp2ZrCl2 and Cp2HfCl2-catalyzed oligomerization of higher α-olefins in mPAO oil base stocks production [Volume 8, Issue 1, 2021, Pages 31-40]
  • Banat, Raid Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour bio-composites [Volume 9, Issue 1, 2022, Pages 1-14]
  • Bazgir, Saeed Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives [Volume 10, Issue 4, 2023, Pages 211-224]
  • Behboodi, Tahereh The influence of branching efficiency on the rheology and morphology of melt state long chain branched polypropylene/polybutene-1 blends [Volume 6, Issue 1, 2019, Pages 1-11]
  • Behboudi, Ali Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 201-212]
  • Bessudnova, Elena Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Beyraghi, Salman Dual-templated synthesis of Si-rich [B]-ZSM-5 for high selective light olefins production from methanol [Volume 8, Issue 2, 2021, Pages 93-103]
  • Bhajiwala, Hiren Manojkumar Synthesis of acrylate-1-hexene based functional polyolefin using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) [Volume 10, Issue 4, 2023, Pages 235-242]
  • Bhajiwala, Hiren Ultra-high molecular weight polyethylene synthesis using externally modified Si-Mg-Ti based Z-N catalyst system [Volume 11, Issue 1, 2024, Pages 61-70]
  • Bhati, Sampat Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection [Volume 3, Issue 2, 2016, Pages 119-133]
  • Boggioni, Laura Propene-cycloolefin polymerization [Volume 1, Issue 1, 2014, Pages 61-75]
  • Bolourinovin, Fatemeh Radiation shielding characteristics of HDPE/tungsten oxide nanocomposites reinforced with graphene oxide and LDPE using Geant4, XCOM and experiment [Volume 11, Issue 3, 2024, Pages 199-211]
  • Boragno, Luca Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Bordbar, Hossein Production of titanium tetrachloride (TiCl4) from titanium ores: A review [Volume 4, Issue 2, 2017, Pages 149-173]
  • Brüll, Robert Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection [Volume 3, Issue 2, 2016, Pages 119-133]
  • Bravaya, Natalia M. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Brevnov, Petr Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method [Volume 4, Issue 1, 2017, Pages 1-12]
  • Bronnikov, Sergei Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]
  • Brusson, Jean-Michel Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]

C

  • Cardozo-Villalba, Eduardo The influence of the oxygen donor capacity of polystearylmethacrylate over polyethylene bulk density when using modified methylaluminoxane as co-catalyst [Volume 9, Issue 2, 2022, Pages 93-101]
  • Carpentier, Jean-François Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Catto, Andre Luis Biodegradation of PP films modified with organic pro-degradant: natural ageing and biodegradation in soil in respirometric test [Volume 3, Issue 1, 2016, Pages 59-68]
  • Cavallo, Luigi Testing DFT ability to predict the stereoselectivity of group 4 metallocenes in propylene polymerization [Volume 1, Issue 2, 2014, Pages 139-146]
  • Chammingkwan, Patchanee Addition of a second alcohol in magnesium ethoxide synthesis as a way to vary the pore architecture of Ziegler-Natta catalysts [Volume 2, Issue 2, 2015, Pages 65-71]
  • Chammingkwan, Patchanee Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts [Volume 3, Issue 1, 2016, Pages 47-57]
  • Chen, Jian Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Chen, Yuerong Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Cheng, Ruihua Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Cheng, Ruihua Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • Cheng, Ruihua Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • Cheng, Ruihua Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • Cheng, Ruihua How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • Cheng, Ruihua Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Cherepanova, Svetlana V. Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization [Volume 4, Issue 1, 2017, Pages 111-122]
  • Chernyshov, Sergey Effect of linear low-density polyethylene on the properties of elastomeric materials based on synthetic polyisoprene [Volume 11, Issue 4, 2024, Pages 213-218]
  • Chervov, Anton Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]
  • Chmutin, Igor Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method [Volume 4, Issue 1, 2017, Pages 1-12]
  • Chuephlob, Chantarawan Competitive effect of calcium lactate and epoxidized soil bean oil on crystallization kinetics of polypropylene [Volume 11, Issue 1, 2024, Pages 29-41]
  • Chujo, Riichiro Characterization of phthalate internal donor in MgCl2 supported Ziegler-Natta catalyst by solid state 13C NMR [Volume 9, Issue 2, 2022, Pages 117-127]
  • Chumachenko, Natalya N. Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization [Volume 4, Issue 1, 2017, Pages 111-122]
  • Cui, Chenxi Advances in PNP-ligated rare-earth-metal complexes: Reactivity and catalytic performances [Volume 10, Issue 2, 2023, Pages 89-99]
  • Cui, Lei Synthesis of cyclic olefin polymers with high glass transition temperature and high transparency using tungsten-based catalyst system [Volume 5, Issue 1, 2018, Pages 15-22]

D

  • Dabiri Havigh, Meisam Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance [Volume 4, Issue 2, 2017, Pages 175-189]
  • Damavandi, Saman Synthesis of high molecular weight polyethylene using FI catalyst [Volume 1, Issue 1, 2014, Pages 25-32]
  • Dana, Mehri Determination of gel content of silane cross-linked polyethylene copolymers using FTIR technique [Volume 11, Issue 1, 2024, Pages 1-10]
  • Daniel, Christophe High porosity polyethylene aerogels [Volume 2, Issue 1, 2015, Pages 49-55]
  • Davachi, Seyed Mohammad Development of a rheological model for polymeric fluids based on FENE model [Volume 6, Issue 1, 2019, Pages 95-106]
  • Den Dauw, Katty Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Deylami, Abolfazl Effect of hydroxyl terminated polybutadiene number-averaged molecular weight on chemorheological behavior of polyurethane networking [Volume 10, Issue 4, 2023, Pages 191-204]
  • Dong, Jin-Yong Synthesizing polypropylene with percolation network catalyzed by inorganic nanoparticles-functionalized Ziegler-Natta catalyst [Volume 11, Issue 2, 2024, Pages 83-93]
  • Dong, Qi Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Doniavi, Ali Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models [Volume 6, Issue 1, 2019, Pages 13-21]
  • Doniavi, Ali Changes in signal transmission speed in coaxial cables through regulating the foam structure of the polyethylene dielectric section [Volume 8, Issue 1, 2021, Pages 41-48]
  • Durmus, Ali Quantifying compositional and physical properties of antimicrobial polyethylene food packaging films using natural and sustainable fillers and additives [(Articles in Press)]

E

  • Ebrahimi, Ali Interplay of reversible chain transfer and comonomer incorporation reactions in coordination copolymerization of ethylene/1–hexene [Volume 7, Issue 1, 2020, Pages 1-11]
  • Ebrahimi, Hossein Development of a rheological model for polymeric fluids based on FENE model [Volume 6, Issue 1, 2019, Pages 95-106]
  • Ehsani, Morteza Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product [Volume 6, Issue 1, 2019, Pages 75-83]
  • El Had, Khalid Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods [Volume 10, Issue 3, 2023, Pages 127-136]
  • El Kori, Rabiaa Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods [Volume 10, Issue 3, 2023, Pages 127-136]
  • Emami, Mehrsa Polymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology [Volume 5, Issue 2, 2018, Pages 111-123]
  • Emami, Mehrsa Kinetic study on liquid propylene polymerization using a modified heat flow reaction calorimeter [Volume 8, Issue 2, 2021, Pages 123-133]
  • Entezam, Mehdi Electron beam irradiation method to change polypropylene application: Rheology and thermomechanical properties [Volume 6, Issue 1, 2019, Pages 53-61]
  • Eslahi, Niloofar Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid [Volume 4, Issue 2, 2017, Pages 213-220]
  • Esmaeily Shoja, Solmaz Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Eungkee Lee, Richard Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models [Volume 6, Issue 1, 2019, Pages 13-21]

F

  • Faingol'd, Evgeny E Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Falivene, Laura Testing DFT ability to predict the stereoselectivity of group 4 metallocenes in propylene polymerization [Volume 1, Issue 2, 2014, Pages 139-146]
  • Fan, Zhiqiang Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • Farrokhi, Mojtaba Synthesis and identification of polystyrene via conventional and controlled radical polymerization methods: Effect of temperature, initiator and transfer agent on molecular weight and reaction rate [Volume 6, Issue 1, 2019, Pages 85-94]
  • Fathi, Mansour Acceleration of thermo-oxidative degradation of high-density polyethylene using oxidized polyethylene [Volume 10, Issue 3, 2023, Pages 149-157]
  • Fazlali, Alireza Optimization of a new catalyst composition for trimerization of ethylene [Volume 11, Issue 4, 2024, Pages 219-233]
  • Fekete, Ladislav Reaction dynamics during the testing of polymerization catalyst [Volume 2, Issue 2, 2015, Pages 89-97]
  • Fernandes, Mercia Discovery and development of metallocene-based polyolefins with special properties [Volume 2, Issue 1, 2015, Pages 1-16]
  • Fonouni, Milad Anti-fouling behaviors of surface functionalized high density polyethylene membrane in microfiltration of bovine serum albumin protein [Volume 4, Issue 1, 2017, Pages 13-26]
  • Foroozan, Ali The influence of branching efficiency on the rheology and morphology of melt state long chain branched polypropylene/polybutene-1 blends [Volume 6, Issue 1, 2019, Pages 1-11]
  • Forte, Maria Madalena Biodegradation of PP films modified with organic pro-degradant: natural ageing and biodegradation in soil in respirometric test [Volume 3, Issue 1, 2016, Pages 59-68]
  • Forte, Maria Madalena Comparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing [Volume 3, Issue 2, 2016, Pages 93-101]
  • Fu, Ting Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • Fu, Ting How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • Fu, Zhisheng Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • Funako, Toshiaki Addition of a second alcohol in magnesium ethoxide synthesis as a way to vary the pore architecture of Ziegler-Natta catalysts [Volume 2, Issue 2, 2015, Pages 65-71]

G

  • Ghafelebashi Zaranda, Seyed Mehdi Determination of kinetic parameters for ethylene polymerization (with and without hydrogen) by Ziegler-Natta catalyst [Volume 7, Issue 2, 2020, Pages 121-130]
  • Ghafelehbashi, Seyed Mehdi Tailoring polypropylene properties by package of internal/external donor in Ziegler Natta catalysts [Volume 11, Issue 4, 2024, Pages 255-263]
  • Ghasemi, Ismaeil An investigation on non-isothermal crystallization behavior and morphology of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites [Volume 2, Issue 2, 2015, Pages 99-108]
  • Ghasemi, Ismaeil Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer [Volume 4, Issue 1, 2017, Pages 137-147]
  • Ghasemi Hamedani, Nona Tailoring polypropylene properties by package of internal/external donor in Ziegler Natta catalysts [Volume 11, Issue 4, 2024, Pages 255-263]
  • Ghasemi Karaj-Abad, Saber Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Ghoreishy, Mir Hamid Reza Modelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization [Volume 1, Issue 2, 2014, Pages 77-91]
  • Golshan, Marzieh Confinement effect of blocks on the morphology of composite particles in co-assembly of block copolymers/homopolymers [Volume 10, Issue 3, 2023, Pages 137-147]
  • Gomari, Sepideh An investigation on non-isothermal crystallization behavior and morphology of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites [Volume 2, Issue 2, 2015, Pages 99-108]
  • Goto, Keisuke Active site nature of magnesium dichloride-supported titanocene catalysts in olefin polymerization [Volume 2, Issue 1, 2015, Pages 57-63]
  • Grebennikov, Andrei Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]
  • Guerra, Gaetano High porosity polyethylene aerogels [Volume 2, Issue 1, 2015, Pages 49-55]
  • Guo, Min Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Gupta, Virendra K. Ultra-high molecular weight polypropylene (UHMWPP): Synthesis and fiber processing [Volume 11, Issue 1, 2024, Pages 21-28]
  • Gupta, Virendrakumar Ultra-high molecular weight polyethylene synthesis using externally modified Si-Mg-Ti based Z-N catalyst system [Volume 11, Issue 1, 2024, Pages 61-70]
  • Gupta, Virendrakumar Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Gupta, Virendrakumar. Synthesis of acrylate-1-hexene based functional polyolefin using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) [Volume 10, Issue 4, 2023, Pages 235-242]

H

  • Habibollahi, Majid Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product [Volume 6, Issue 1, 2019, Pages 75-83]
  • Habila, Tahir Effect of quenching temperature and filler rate on the mechanical thermal and physical properties of composites: Polypropylene/calcium carbonate [Volume 11, Issue 1, 2024, Pages 11-19]
  • Hachim, Abdelilah Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods [Volume 10, Issue 3, 2023, Pages 127-136]
  • Hadian, Najmeh Storage time effect on dynamic structure of MgCl2.nEtOH adducts in heterogeneous Ziegler-Natta catalysts [Volume 1, Issue 1, 2014, Pages 33-41]
  • Haghighat Kish, Mohammad Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid [Volume 4, Issue 2, 2017, Pages 213-220]
  • Hai, Ping Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Hajiabdolrasouli, Mehdi Rheological, thermal and tensile properties of PE/nanoclay nanocomposites and PE/nanoclay nanocomposite cast films [Volume 5, Issue 1, 2018, Pages 47-58]
  • Hakim, Shokoofeh Storage time effect on dynamic structure of MgCl2.nEtOH adducts in heterogeneous Ziegler-Natta catalysts [Volume 1, Issue 1, 2014, Pages 33-41]
  • Hakim, Shokoufeh Effect of NH3/methylaluminoxane/dodecylamine modifiednanoclay on morphology and properties of polyethylene/ clay nanocomposites prepared by in-situ polymerization [Volume 5, Issue 2, 2018, Pages 125-139]
  • Hakim, Shokoufeh The relationship among changes in microstructure, active sites behavior and properties in the propylene polymerization with a 4th generation Ziegler-Natta catalyst [Volume 6, Issue 2, 2019, Pages 139-150]
  • Hamdi, Ahmed Moldability analysis of several types of polypropylenes using flow-length measurement [Volume 10, Issue 3, 2023, Pages 159-167]
  • Hamdi, Ahmed Experiments and analysis of stress-induced stiffening of a polypropylene [Volume 11, Issue 3, 2024, Pages 149-154]
  • Han, Zhengang Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Hanifpour, Ahad Kinetic and microstructural studies of Cp2ZrCl2 and Cp2HfCl2-catalyzed oligomerization of higher α-olefins in mPAO oil base stocks production [Volume 8, Issue 1, 2021, Pages 31-40]
  • Hao, Wei Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Hasanzadeh, Rezgar Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models [Volume 6, Issue 1, 2019, Pages 13-21]
  • Hasanzadeh, Rezgar Foam rotational molding of hybrid polyethylene nanocomposites: synergistic effect of microtalc and nanoclay [Volume 9, Issue 2, 2022, Pages 129-138]
  • Hashemzadeh Gargari, Mahdi Kinetic and microstructural studies of Cp2ZrCl2 and Cp2HfCl2-catalyzed oligomerization of higher α-olefins in mPAO oil base stocks production [Volume 8, Issue 1, 2021, Pages 31-40]
  • Hassan, Fatemeh Electron beam irradiation method to change polypropylene application: Rheology and thermomechanical properties [Volume 6, Issue 1, 2019, Pages 53-61]
  • Hazrati, Hossein Selective production of light olefins from methanol over desilicated highly siliceous ZSM-5 nanocatalysts [Volume 5, Issue 1, 2018, Pages 59-70]
  • Hazrati, Hossein Hydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology [Volume 5, Issue 2, 2018, Pages 97-109]
  • He, Feng Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • He, Xuelian Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • He, Xuelian Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • He, Xuelian Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • He, Xuelian Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • He, Xuelian How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • He, Xuelian Molecular dynamics simulation for polyethylene crystallization: Effect of long chain branches [Volume 8, Issue 2, 2021, Pages 73-84]
  • He, Xuelian Effect of 5-ethylidene-2-norbomene or cyclopentene comonomers on the micro-structures, mechanical and dynamic mechanical properties of polydicyclopentadiene [Volume 9, Issue 2, 2022, Pages 139-149]
  • He, Xuelian Effect of different catalyst ratios on the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene [Volume 9, Issue 2, 2022, Pages 151-162]
  • He, Xuelian Molecular dynamics simulation of static crystallization and tensile deformation of bimodal HDPE/UHMWPE: Influence of long chain content [Volume 11, Issue 3, 2024, Pages 167-185]
  • Hedayati Moghaddam, Amin Permeability and selectivity prediction of poly (4-methyl 1-pentane) membrane modified by nanoparticles in gas separation through artificial intelligent systems [Volume 7, Issue 2, 2020, Pages 91-98]
  • Heidari, Setareh Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 235-251]
  • Heidarinasab, Amir Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products [Volume 6, Issue 1, 2019, Pages 43-52]
  • Heydari, Mohammad Hossein Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Heydarinasab, Amir Effects of the nozzle arrangement and aerator configuration in slug bubble production to enhance the foulant removal from a flat sheet membrane bioreactor [Volume 10, Issue 2, 2023, Pages 117-126]
  • Hongmanee, Goond Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts [Volume 3, Issue 1, 2016, Pages 47-57]
  • Hoque, Md Enamul Innovative catalytic systems driving sustainable olefin polymerization: Recent advances and green chemistry approaches [(Articles in Press)]
  • Hormozi, Farzin Kinetic study on liquid propylene polymerization using a modified heat flow reaction calorimeter [Volume 8, Issue 2, 2021, Pages 123-133]
  • Hoseinpour, Shahab Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties [Volume 6, Issue 1, 2019, Pages 63-74]
  • Hossain, Farabi Innovative catalytic systems driving sustainable olefin polymerization: Recent advances and green chemistry approaches [(Articles in Press)]
  • Hosseini, Mohammad Amin Radiation shielding characteristics of HDPE/tungsten oxide nanocomposites reinforced with graphene oxide and LDPE using Geant4, XCOM and experiment [Volume 11, Issue 3, 2024, Pages 199-211]
  • Hosseinzadeh, Mehdi Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Hou, Liping Monomer effect on the chain transfer by diethyl zinc in olefin polymerization by metallocene catalysts [Volume 8, Issue 2, 2021, Pages 85-91]
  • Hu, Fenge Molecular dynamics simulation for polyethylene crystallization: Effect of long chain branches [Volume 8, Issue 2, 2021, Pages 73-84]
  • Hu, Hongfan Advances in PNP-ligated rare-earth-metal complexes: Reactivity and catalytic performances [Volume 10, Issue 2, 2023, Pages 89-99]
  • Hu, Youliang Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Hu, Youliang Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Hu, Youliang Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Huang, He Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Huang, Jun Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]

J

  • Jafari, Yaser Two novel methods for synthesizing poly (propylene fumarate): Technical aspects and role of vacuum and N2 purging effects [Volume 4, Issue 1, 2017, Pages 27-41]
  • Jafarifar, Davoud Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Jafarzadeh, Yoones Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 201-212]
  • Jafarzadeh, Yoones Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 235-251]
  • Jafarzadeh, Yoones Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties [Volume 6, Issue 1, 2019, Pages 63-74]
  • Jahanbakhshi, Nader Hydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology [Volume 5, Issue 2, 2018, Pages 97-109]
  • Jahani, Yousef The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers [Volume 2, Issue 2, 2015, Pages 109-119]
  • Jahani, Yousef The influence of branching efficiency on the rheology and morphology of melt state long chain branched polypropylene/polybutene-1 blends [Volume 6, Issue 1, 2019, Pages 1-11]
  • Jahani, Yousef Comparison of grafting of maleic anhydride onto linear low density polyethylene with hexene-1 and butene-1 comonomers and prediction of optimum ingredients by response surface methodology [Volume 8, Issue 1, 2021, Pages 11-19]
  • Jahani, Yousef LDPE and poly(1-butene) blends: Morphology, crystallinity and rheological properties [Volume 8, Issue 1, 2021, Pages 21-30]
  • Jahani, Yousef A practical criterion for synthesizing ethylen-1-butene copolymer in powder form in slurry polymerization with a Ziegler-Natta catalyst and predicting its incorporated 1-butene [Volume 10, Issue 4, 2023, Pages 243-251]
  • Jahanmardi, Reza Evaluation of effects of thymolphthalein on thermooxidative stability of polypropylene [Volume 4, Issue 1, 2017, Pages 79-86]
  • Jahanmardi, Reza Acceleration of thermo-oxidative degradation of high-density polyethylene using oxidized polyethylene [Volume 10, Issue 3, 2023, Pages 149-157]
  • Jahanmardi, Reza Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives [Volume 10, Issue 4, 2023, Pages 211-224]
  • Jalilian, Seyed Mehrdad Synthesis and assessment of the effect of monomer feed ratio and Lewis acids on copolymerization of butyl methacrylate/1-octene [Volume 9, Issue 2, 2022, Pages 85-91]
  • Jalilian, Seyed Mehrdad Novel insight into low-temperature performance of various poly(alkyl methacrylate) homopolymers in lube oil [Volume 10, Issue 3, 2023, Pages 169-175]
  • Javaheri, Mohsen A practical criterion for synthesizing ethylen-1-butene copolymer in powder form in slurry polymerization with a Ziegler-Natta catalyst and predicting its incorporated 1-butene [Volume 10, Issue 4, 2023, Pages 243-251]
  • Jayanarayanan, Karingamanna Nano, micro and multiscale filler-reinforced functionalized polypropylene composites: FTIR characterization and mechanical study [Volume 9, Issue 1, 2022, Pages 33-43]
  • Jaymand, Mehdi Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Jovanović, Slobodan Compression, supramolecular organization and free radical polymerization of ethylene gas [Volume 6, Issue 1, 2019, Pages 23-41]
  • Jozaghkar, Mohammad Reza Synthesis and assessment of the effect of monomer feed ratio and Lewis acids on copolymerization of butyl methacrylate/1-octene [Volume 9, Issue 2, 2022, Pages 85-91]
  • Jozaghkar, Mohammad Reza Novel insight into low-temperature performance of various poly(alkyl methacrylate) homopolymers in lube oil [Volume 10, Issue 3, 2023, Pages 169-175]
  • Jozaghkar, Mohammad Reza Synthesis of novel styrene-olefin triblock copolymer via living anionic polymerization [Volume 11, Issue 2, 2024, Pages 95-101]
  • Jumaah, Ahmed Fadhil Fabrication and performance evaluation of mixed matrix membrane comprising Pebax and graphene hydroxyl in olefin/paraffin separation [(Articles in Press)]

K

  • Kadam, Pooja Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Kahraman, Memet Vezir Quantifying compositional and physical properties of antimicrobial polyethylene food packaging films using natural and sustainable fillers and additives [(Articles in Press)]
  • Kakhramanov, Najaf Structure and kinetic regulations of PP-R/PPH-g-MAH/Al(OH)3 based nanocomposites crystallization [Volume 11, Issue 4, 2024, Pages 243-253]
  • Kalantari, Zahra Kinetic and microstructural studies of Cp2ZrCl2 and Cp2HfCl2-catalyzed oligomerization of higher α-olefins in mPAO oil base stocks production [Volume 8, Issue 1, 2021, Pages 31-40]
  • Kaminsky, Walter Discovery and development of metallocene-based polyolefins with special properties [Volume 2, Issue 1, 2015, Pages 1-16]
  • Kannan, Murugasamy Effect of compatibilizer and nanosilica on the mechanical, thermal, and degradation kinetic properties of polypropylene/polylactic acid blends [Volume 11, Issue 1, 2024, Pages 43-59]
  • Kapasharov, Artur T. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Karami, Nikoo Evaluation of effects of thymolphthalein on thermooxidative stability of polypropylene [Volume 4, Issue 1, 2017, Pages 79-86]
  • Karimzadeh, Saeed Foam rotational molding of hybrid polyethylene nanocomposites: synergistic effect of microtalc and nanoclay [Volume 9, Issue 2, 2022, Pages 129-138]
  • Karrabi, Mohammad An investigation on non-isothermal crystallization behavior and morphology of polyamide 6/ poly(ethylene-co-1-butene)-graft-maleic anhydride/organoclay nanocomposites [Volume 2, Issue 2, 2015, Pages 99-108]
  • Kashimura, Hiroshi Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Kataoka, Takuo Characterization of phthalate internal donor in MgCl2 supported Ziegler-Natta catalyst by solid state 13C NMR [Volume 9, Issue 2, 2022, Pages 117-127]
  • Kataoka, Takuo Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Kebritchi, Abbas The role of 1-hexene comonomer content in thermal behavior of medium density polyethylene (MDPE) synthesized using Phillips catalyst [Volume 1, Issue 2, 2014, Pages 117-129]
  • Kebritchi, Abbas Thermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content [Volume 6, Issue 2, 2019, Pages 127-138]
  • Kebritchi, Abbas Effect of hydroxyl terminated polybutadiene number-averaged molecular weight on chemorheological behavior of polyurethane networking [Volume 10, Issue 4, 2023, Pages 191-204]
  • Khademeh Molavi, Fateme Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber [Volume 3, Issue 2, 2016, Pages 69-77]
  • Khajehpour-Tadavani, Soheyl Changes in crystallinity of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure [Volume 7, Issue 1, 2020, Pages 25-32]
  • KhajehPour-Tadavani, Soheyl Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation [Volume 7, Issue 2, 2020, Pages 111-119]
  • Khaksar, Elmira Confinement effect of blocks on the morphology of composite particles in co-assembly of block copolymers/homopolymers [Volume 10, Issue 3, 2023, Pages 137-147]
  • Khonakdar, Hossein Thermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content [Volume 6, Issue 2, 2019, Pages 127-138]
  • Khonakdar, Hossein-Ali Influence of annealing on anisotropic crystalline structure of HDPE cast films [Volume 3, Issue 1, 2016, Pages 1-9]
  • Khonakdar, Hossein Ali The role of 1-hexene comonomer content in thermal behavior of medium density polyethylene (MDPE) synthesized using Phillips catalyst [Volume 1, Issue 2, 2014, Pages 117-129]
  • Khorsand, Hamid Simulation and modeling of macro and micro components produced by powder injection molding: A review [Volume 7, Issue 1, 2020, Pages 45-60]
  • Kirillov, Evgeny Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Konyaeva, Lada A. Effect of linear low-density polyethylene on the properties of elastomeric materials based on synthetic polyisoprene [Volume 11, Issue 4, 2024, Pages 213-218]
  • Kostromin, Sergei Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]
  • Kothari, Ajay V Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Kubade, Pravin R. A study of polypropylene and graphene and their nanocomposites using ANSYS [Volume 11, Issue 3, 2024, Pages 155-166]
  • Kuryndin, Ivan Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]

L

  • Lamarti, Amal Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods [Volume 10, Issue 3, 2023, Pages 127-136]
  • Lashmanov, Nikita N. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Latreche, Leila Effect of quenching temperature and filler rate on the mechanical thermal and physical properties of composites: Polypropylene/calcium carbonate [Volume 11, Issue 1, 2024, Pages 11-19]
  • Lee, Dong-Ho Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method [Volume 4, Issue 1, 2017, Pages 69-77]
  • Lee, Seung-Ri Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method [Volume 4, Issue 1, 2017, Pages 69-77]
  • Leone, Giuseppe Recent advances in the polymerization of butadiene over the last decade [Volume 1, Issue 1, 2014, Pages 43-60]
  • Li, Ao Synthesizing polypropylene with percolation network catalyzed by inorganic nanoparticles-functionalized Ziegler-Natta catalyst [Volume 11, Issue 2, 2024, Pages 83-93]
  • Li, Huayi Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Li, Huayi Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Li, Huayi Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Li, Lei Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Li, Peiyuan Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • Li, Qian Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Li, Qian Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Li, Qian Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Li, Xinwei Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Li, Yan-Guo Synthesis of cyclic olefin polymers with high glass transition temperature and high transparency using tungsten-based catalyst system [Volume 5, Issue 1, 2018, Pages 15-22]
  • Li, Yue-Sheng Synthesis of cyclic olefin polymers with high glass transition temperature and high transparency using tungsten-based catalyst system [Volume 5, Issue 1, 2018, Pages 15-22]
  • Limbo, Sara Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Ling, Shijia Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Liu, Boping Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Liu, Boping Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • Liu, Boping Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • Liu, Boping Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • Liu, Boping How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • Liu, Boping Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Liu, Yue Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Liu, Zhen Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Liu, Zhen Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • Liu, Zhen Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • Liu, Zhen Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • Liu, Zhen How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • Long, Cunling Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Longo, Simona High porosity polyethylene aerogels [Volume 2, Issue 1, 2015, Pages 49-55]
  • Losio, Simona Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Lyusova, Lyudmila R. Effect of linear low-density polyethylene on the properties of elastomeric materials based on synthetic polyisoprene [Volume 11, Issue 4, 2024, Pages 213-218]

M

  • Ma, Rongqing Advances in PNP-ligated rare-earth-metal complexes: Reactivity and catalytic performances [Volume 10, Issue 2, 2023, Pages 89-99]
  • Macko, Tibor Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection [Volume 3, Issue 2, 2016, Pages 119-133]
  • Maghsoudi, Hafez Theoretical screening of zeolites for membrane separation of propylene/propane mixtures [Volume 5, Issue 1, 2018, Pages 23-30]
  • Mahdavi Akerdi, Aliasghar Competitive particle growth at different conditions of oligo-micelle formation in hydro-alcoholic solution of anionic double-chain emulsifier via batch emulsion polymerization of vinyl chloride [Volume 7, Issue 1, 2020, Pages 33-44]
  • Mahdaviani, Seyed Hamed Optimization of a new catalyst composition for trimerization of ethylene [Volume 11, Issue 4, 2024, Pages 219-233]
  • Mahmoudi Yayshahri, Ali Impact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion [Volume 6, Issue 2, 2019, Pages 151-158]
  • Malekie, Shahryar Radiation shielding characteristics of HDPE/tungsten oxide nanocomposites reinforced with graphene oxide and LDPE using Geant4, XCOM and experiment [Volume 11, Issue 3, 2024, Pages 199-211]
  • Mamalimov, Rustam Organic solvents effect on the physical and mechanical properties of polyethylene [Volume 9, Issue 1, 2022, Pages 25-31]
  • Mancini, Giorgio Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Mao, Guoliang Advances in PNP-ligated rare-earth-metal complexes: Reactivity and catalytic performances [Volume 10, Issue 2, 2023, Pages 89-99]
  • Maou, Samira Synergistic effects of metal stearate, calcium carbonate, and recycled polyethylene on thermo-mechanical behavior of polyvinylchloride [Volume 10, Issue 1, 2023, Pages 1-11]
  • Maou, Samira Thermophysical behavior of date palm fiber-reinforced polyvinylchloride /low-density polyethylene/acrylonitrile butadiene rubber copolymer ternary composite [Volume 10, Issue 4, 2023, Pages 225-233]
  • Maou, Samira Effect of quenching temperature and filler rate on the mechanical thermal and physical properties of composites: Polypropylene/calcium carbonate [Volume 11, Issue 1, 2024, Pages 11-19]
  • Maroofi, Majedeh Polymerization of methyl methacrylate using bis(imine)cobalt, a polyolefin catalyst [Volume 10, Issue 2, 2023, Pages 79-88]
  • Marouf, Bahereh T. Controlling the rheological behavior of nucleated polypropylene via incorporating dimethylbenzylidene sorbitol (DMDBS) masterbatch [Volume 10, Issue 1, 2023, Pages 21-26]
  • Marques, Maria In situ stabilization of polypropylene by lignin using a Ziegler-Natta catalyst [Volume 1, Issue 1, 2014, Pages 17-24]
  • Marques, Maria Influence of diethyl zinc on ethylene-norbornene copolymerization [Volume 5, Issue 1, 2018, Pages 71-84]
  • Masoumi, Sepideh Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties [Volume 6, Issue 1, 2019, Pages 63-74]
  • Matsko, Mikhail A. Kinetics of ethylene polymerization over titanium-magnesium catalysts: The reasons for the observed second order of polymerization rate with respect to ethylene [Volume 2, Issue 1, 2015, Pages 27-38]
  • Matsko, Mikhail Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Matsko, Mikhail A. Regulation of molecular weight, molecular weight distribution and branching distribution in polyethylene, produced by supported catalysts bearing bis(imino)pyridyl Fe(II) and N,N-α-diimine Ni(II) complexes [Volume 9, Issue 2, 2022, Pages 103-116]
  • Matsko, Mikhail The influence of magnesium dichloride as support on molecular weights of the polyethylenes produced by Ziegler-Natta catalyst [Volume 11, Issue 4, 2024, Pages 235-242]
  • Mazinani, Saeedeh Exploring the possibility of chemisorption of ethylene on graphene with and without defects [Volume 10, Issue 2, 2023, Pages 101-115]
  • McDonald, Armando G. Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor [Volume 2, Issue 1, 2015, Pages 39-47]
  • Meftah, Yazid Synergistic effects of metal stearate, calcium carbonate, and recycled polyethylene on thermo-mechanical behavior of polyvinylchloride [Volume 10, Issue 1, 2023, Pages 1-11]
  • Meftah, Yazid Thermophysical behavior of date palm fiber-reinforced polyvinylchloride /low-density polyethylene/acrylonitrile butadiene rubber copolymer ternary composite [Volume 10, Issue 4, 2023, Pages 225-233]
  • Meftah, Yazid Effect of quenching temperature and filler rate on the mechanical thermal and physical properties of composites: Polypropylene/calcium carbonate [Volume 11, Issue 1, 2024, Pages 11-19]
  • Meghezzi, Ahmed Synergistic effects of metal stearate, calcium carbonate, and recycled polyethylene on thermo-mechanical behavior of polyvinylchloride [Volume 10, Issue 1, 2023, Pages 1-11]
  • Meghezzi, Ahmed Thermophysical behavior of date palm fiber-reinforced polyvinylchloride /low-density polyethylene/acrylonitrile butadiene rubber copolymer ternary composite [Volume 10, Issue 4, 2023, Pages 225-233]
  • Menichetti, Stefano Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Mi, Yingying Effect of 5-ethylidene-2-norbomene or cyclopentene comonomers on the micro-structures, mechanical and dynamic mechanical properties of polydicyclopentadiene [Volume 9, Issue 2, 2022, Pages 139-149]
  • Mikenas, Tatiana B. Kinetics of ethylene polymerization over titanium-magnesium catalysts: The reasons for the observed second order of polymerization rate with respect to ethylene [Volume 2, Issue 1, 2015, Pages 27-38]
  • Mikenas, Tatiana Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Mikenas, Tatiana B. The influence of magnesium dichloride as support on molecular weights of the polyethylenes produced by Ziegler-Natta catalyst [Volume 11, Issue 4, 2024, Pages 235-242]
  • Miller, Stephen A. Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Mir Mohamad Sadeghi, Gity Two novel methods for synthesizing poly (propylene fumarate): Technical aspects and role of vacuum and N2 purging effects [Volume 4, Issue 1, 2017, Pages 27-41]
  • Mirmohammadi, Seyed Amin Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization [Volume 4, Issue 2, 2017, Pages 253-262]
  • Mirmohammadi, Seyed Amin Removal of methylene blue dye from aqueous solutions by a new wood/plastic composite based on HDPE and wood particles [Volume 10, Issue 1, 2023, Pages 27-33]
  • Mirzaei, Habibolah Preparation and characterization of a bionanopolymer film for walnut packaging [Volume 6, Issue 2, 2019, Pages 159-167]
  • Miserque, Olivier Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Mobini-Dehkordi, Mahsa Effect of replacing EPDM with high molecular weight amorphous poly(1-hexene) on the mechanical behavior of iPP/iPP-g-MA/EPDM blends [Volume 10, Issue 1, 2023, Pages 13-20]
  • Moeenfard, Hamid Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives [Volume 10, Issue 4, 2023, Pages 211-224]
  • Mohamadnia, Zahra Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Mohammadi, Fereidoon The role of 1-hexene comonomer content in thermal behavior of medium density polyethylene (MDPE) synthesized using Phillips catalyst [Volume 1, Issue 2, 2014, Pages 117-129]
  • Mohammadi, Fereidoun Thermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content [Volume 6, Issue 2, 2019, Pages 127-138]
  • Mohammadi, Mohsen Interplay of reversible chain transfer and comonomer incorporation reactions in coordination copolymerization of ethylene/1–hexene [Volume 7, Issue 1, 2020, Pages 1-11]
  • Mohammed, Slimani Thermophysical behavior of date palm fiber-reinforced polyvinylchloride /low-density polyethylene/acrylonitrile butadiene rubber copolymer ternary composite [Volume 10, Issue 4, 2023, Pages 225-233]
  • Mohd Nawawi, Mohd Ghazali Ethylene yield in a large-scale olefin plant utilizing regression analysis [Volume 8, Issue 2, 2021, Pages 105-113]
  • Mohd Nawawi, Mohd Ghazali Propylene yield from naphtha pyrolysis cracking using surface response analysis [Volume 9, Issue 1, 2022, Pages 15-24]
  • Mokhtari-Aliabad, Javad Removal of methylene blue dye from aqueous solutions by a new wood/plastic composite based on HDPE and wood particles [Volume 10, Issue 1, 2023, Pages 27-33]
  • Montagna, Larissa Biodegradation of PP films modified with organic pro-degradant: natural ageing and biodegradation in soil in respirometric test [Volume 3, Issue 1, 2016, Pages 59-68]
  • Montagna, Larissa Stieven Comparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing [Volume 3, Issue 2, 2016, Pages 93-101]
  • Moradian, Milad Changes in signal transmission speed in coaxial cables through regulating the foam structure of the polyethylene dielectric section [Volume 8, Issue 1, 2021, Pages 41-48]
  • Moradian, Milad Foam rotational molding of hybrid polyethylene nanocomposites: synergistic effect of microtalc and nanoclay [Volume 9, Issue 2, 2022, Pages 129-138]
  • Morshedian, Jalil The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers [Volume 2, Issue 2, 2015, Pages 109-119]
  • Morshedian, Jalil Influence of annealing on anisotropic crystalline structure of HDPE cast films [Volume 3, Issue 1, 2016, Pages 1-9]
  • Morshedian, Jalil Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product [Volume 6, Issue 1, 2019, Pages 75-83]
  • Morshedian, Jalil Preparation and characterization of nano WO3/Bi2O3/GO and BaSO4/GO dispersed HDPE composites for X-ray shielding application [Volume 9, Issue 2, 2022, Pages 73-83]
  • Mortazavi, Mohammad-Mahdi Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Mortazavi, Mohammad-Mahdi Interplay of reversible chain transfer and comonomer incorporation reactions in coordination copolymerization of ethylene/1–hexene [Volume 7, Issue 1, 2020, Pages 1-11]
  • Mortazavi, Mohammad-Mahdi Changes in crystallinity of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure [Volume 7, Issue 1, 2020, Pages 25-32]
  • Mortazavi, Mohammad-Mahdi Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation [Volume 7, Issue 2, 2020, Pages 111-119]
  • Mortazavi, Mohammad-Mahdi Effect of replacing EPDM with high molecular weight amorphous poly(1-hexene) on the mechanical behavior of iPP/iPP-g-MA/EPDM blends [Volume 10, Issue 1, 2023, Pages 13-20]
  • Mortazavi, Seyed Mohammad Mehdi Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Mostafapour, Amir Theoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process [Volume 4, Issue 1, 2017, Pages 99-109]
  • Moztarzadeh, Fathollah Two novel methods for synthesizing poly (propylene fumarate): Technical aspects and role of vacuum and N2 purging effects [Volume 4, Issue 1, 2017, Pages 27-41]
  • Mroofi, Majedeh Homo- and co-polymerization of polar and non-polar olefinic monomers using bicenter cobalt-diimine catalysts [Volume 11, Issue 2, 2024, Pages 125-136]
  • Murata, Masahide Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Murata, Masahide Characterization of phthalate internal donor in MgCl2 supported Ziegler-Natta catalyst by solid state 13C NMR [Volume 9, Issue 2, 2022, Pages 117-127]
  • Murata, Masahide Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Mustafayeva, Fatima Structure and kinetic regulations of PP-R/PPH-g-MAH/Al(OH)3 based nanocomposites crystallization [Volume 11, Issue 4, 2024, Pages 243-253]

N

  • Naderi, Ghasem Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber [Volume 3, Issue 2, 2016, Pages 69-77]
  • Naderi, Ghasem Theoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process [Volume 4, Issue 1, 2017, Pages 99-109]
  • Naderi, Ghasem Effect of process parameters on tensile strength of welds and modeling of laser welding of PA6/NBR/clay nanocomposite by response surface methodology [Volume 7, Issue 2, 2020, Pages 99-110]
  • Naderi, Ghasem Natural rubber/natural rubber reclaim nanocomposites: Role of functional nanoparticles, mixing sequences and coupling agents [Volume 8, Issue 2, 2021, Pages 115-122]
  • Najafi, Mohsen Modelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization [Volume 1, Issue 2, 2014, Pages 77-91]
  • Najafi, Mohsen Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization [Volume 2, Issue 2, 2015, Pages 121-133]
  • Nakhaei, Moammadreza Effect of process parameters on tensile strength of welds and modeling of laser welding of PA6/NBR/clay nanocomposite by response surface methodology [Volume 7, Issue 2, 2020, Pages 99-110]
  • Nakhaei, Mohammad Reza Theoretical models for prediction of mechanical behaviour of the PP/EPDM nanocomposites fabricated by friction stir process [Volume 4, Issue 1, 2017, Pages 99-109]
  • NazarpourFard, Hamed Polyvinylpyrrolidone and polystyrene composites based on economical high quality biofillers derived from rice husk: Spectroscopic and hydrophilic investigations [Volume 10, Issue 1, 2023, Pages 45-57]
  • Nejabat, Gholam-Reza Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Nejabat, Gholam-Reza A theoretical reasoning on why coordination catalysts supported on mesoporous supports produce HDPE crystalline nanofibers but not iPP crystalline nanofibers [Volume 5, Issue 2, 2018, Pages 153-156]
  • Nejabat, Gholam-Reza Changes in crystallinity of HDPE films containing different amounts of an oxo-biodegradable additive due to UVC exposure [Volume 7, Issue 1, 2020, Pages 25-32]
  • Nejabat, Gholam-Reza Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation [Volume 7, Issue 2, 2020, Pages 111-119]
  • Nejabat, Gholam-Reza Effect of replacing EPDM with high molecular weight amorphous poly(1-hexene) on the mechanical behavior of iPP/iPP-g-MA/EPDM blends [Volume 10, Issue 1, 2023, Pages 13-20]
  • Nekoomanesh, Mehdi The role of 1-hexene comonomer content in thermal behavior of medium density polyethylene (MDPE) synthesized using Phillips catalyst [Volume 1, Issue 2, 2014, Pages 117-129]
  • Nekoomanesh, Mehdi Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Nekoomanesh, Mehdi Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization [Volume 4, Issue 2, 2017, Pages 253-262]
  • Nekoomanesh, Mehdi Effect of NH3/methylaluminoxane/dodecylamine modifiednanoclay on morphology and properties of polyethylene/ clay nanocomposites prepared by in-situ polymerization [Volume 5, Issue 2, 2018, Pages 125-139]
  • Nekoomanesh, Mehdi Thermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content [Volume 6, Issue 2, 2019, Pages 127-138]
  • Nekoomanesh, Mehdi The relationship among changes in microstructure, active sites behavior and properties in the propylene polymerization with a 4th generation Ziegler-Natta catalyst [Volume 6, Issue 2, 2019, Pages 139-150]
  • Nekoomanesh, Mehdi Competitive particle growth at different conditions of oligo-micelle formation in hydro-alcoholic solution of anionic double-chain emulsifier via batch emulsion polymerization of vinyl chloride [Volume 7, Issue 1, 2020, Pages 33-44]
  • Nekoomanesh, Mehdi Editorial Notes [Volume 9, Issue 1, 2022]
  • Nekoomanesh, Mehdi A practical criterion for synthesizing ethylen-1-butene copolymer in powder form in slurry polymerization with a Ziegler-Natta catalyst and predicting its incorporated 1-butene [Volume 10, Issue 4, 2023, Pages 243-251]
  • Nekoomanesh-Haghighi, Mehdi Storage time effect on dynamic structure of MgCl2.nEtOH adducts in heterogeneous Ziegler-Natta catalysts [Volume 1, Issue 1, 2014, Pages 33-41]
  • Nekoomanesh-Haghighi, Mehdi Polyolefin and olefin production in Iran: Current and future capacities [Volume 3, Issue 1, 2016, Pages 11-22]
  • Nekoomanesh Haghighi, Mehdi Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor [Volume 2, Issue 1, 2015, Pages 39-47]
  • Nekoomanesh Haghighi, Mehdi Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products [Volume 6, Issue 1, 2019, Pages 43-52]
  • Nicolau, Verónica Viviana Biobased polyester from soybean oil: Synthesis, characterization and degradation studies [Volume 9, Issue 1, 2022, Pages 45-60]
  • Nikfarjam, Alireza Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites [Volume 4, Issue 1, 2017, Pages 43-68]
  • Nikolaeva, Marina I. Kinetics of ethylene polymerization over titanium-magnesium catalysts: The reasons for the observed second order of polymerization rate with respect to ethylene [Volume 2, Issue 1, 2015, Pages 27-38]
  • Nikolaeva, Marina Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Nomura, Kotohiro Development of half-titanocene catalysts for synthesis of cyclic olefin copolymers [Volume 10, Issue 2, 2023, Pages 59-70]
  • Nouri, Marzieh Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization [Volume 2, Issue 2, 2015, Pages 121-133]
  • Nouri-Ahangarani, Farshid Effects of FeCl3 doping on the performance of MgCl2/TiCl4/DNPB catalyst in 1-hexene polymerization [Volume 4, Issue 2, 2017, Pages 253-262]
  • Nourmohammadi, Mohammad Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives [Volume 10, Issue 4, 2023, Pages 211-224]
  • Novokshonova, Ludmila Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method [Volume 4, Issue 1, 2017, Pages 1-12]

O

  • Oliveira, Renato In situ stabilization of polypropylene by lignin using a Ziegler-Natta catalyst [Volume 1, Issue 1, 2014, Pages 17-24]
  • Onsekizoglu, Ali Sefa Quantifying compositional and physical properties of antimicrobial polyethylene food packaging films using natural and sustainable fillers and additives [(Articles in Press)]
  • Oromiehie, Abdulrasoul Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer [Volume 4, Issue 1, 2017, Pages 137-147]
  • Ostrovskii, Nickolay Reaction dynamics during the testing of polymerization catalyst [Volume 2, Issue 2, 2015, Pages 89-97]

P

  • Pérez-Camacho, Odilia The influence of the oxygen donor capacity of polystearylmethacrylate over polyethylene bulk density when using modified methylaluminoxane as co-catalyst [Volume 9, Issue 2, 2022, Pages 93-101]
  • Pajouhan, Ali Polyolefin and olefin production in Iran: Current and future capacities [Volume 3, Issue 1, 2016, Pages 11-22]
  • Pajoum Shariati, Farshid Effects of the nozzle arrangement and aerator configuration in slug bubble production to enhance the foulant removal from a flat sheet membrane bioreactor [Volume 10, Issue 2, 2023, Pages 117-126]
  • Panchenko, Valentina Nikolaevna Ziegler-Natta catalysts for propylene polymerization – Interaction of an external donor with the catalyst [Volume 4, Issue 1, 2017, Pages 87-97]
  • Panchenko, Valentina N. Regulation of molecular weight, molecular weight distribution and branching distribution in polyethylene, produced by supported catalysts bearing bis(imino)pyridyl Fe(II) and N,N-α-diimine Ni(II) complexes [Volume 9, Issue 2, 2022, Pages 103-116]
  • Panin, Andrei N. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Parvazinia, Mahmoud Modelling the catalyst fragmentation pattern in relation to molecular properties and particle overheating in olefin polymerization [Volume 1, Issue 2, 2014, Pages 77-91]
  • Parvazinia, Mahmoud Mathematical modeling the effect of catalyst initial shape and the crack pattern in olefin copolymerization [Volume 2, Issue 2, 2015, Pages 121-133]
  • Parvazinia, Mahmoud Polymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology [Volume 5, Issue 2, 2018, Pages 111-123]
  • Patil, Sandip Ultra-high molecular weight polypropylene (UHMWPP): Synthesis and fiber processing [Volume 11, Issue 1, 2024, Pages 21-28]
  • Peighambardoust, Seyed Jamaleddin Impact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion [Volume 6, Issue 2, 2019, Pages 151-158]
  • Peng, Zhongchuan Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Pereira, Leticia Influence of diethyl zinc on ethylene-norbornene copolymerization [Volume 5, Issue 1, 2018, Pages 71-84]
  • Pezzin, Ana Paula Testa Comparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing [Volume 3, Issue 2, 2016, Pages 93-101]
  • Phueaksri, Nutchalida Competitive effect of calcium lactate and epoxidized soil bean oil on crystallization kinetics of polypropylene [Volume 11, Issue 1, 2024, Pages 29-41]
  • Poonkasem, Pathamanat Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites [Volume 11, Issue 4, 2024, Pages 265-275]
  • Poorghasemi, Reza LDPE and poly(1-butene) blends: Morphology, crystallinity and rheological properties [Volume 8, Issue 1, 2021, Pages 21-30]
  • Poorsank, Fatemeh Tailoring polypropylene properties by package of internal/external donor in Ziegler Natta catalysts [Volume 11, Issue 4, 2024, Pages 255-263]
  • Pourabbas, Behzad CO2 absorption through PP/fSiO2 nanocomposite hollow fiber membrane contactor [Volume 9, Issue 1, 2022, Pages 61-71]
  • Prasittinawa, Sirirat Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites [Volume 11, Issue 4, 2024, Pages 265-275]

Q

  • Qin, Yawei Synthesizing polypropylene with percolation network catalyzed by inorganic nanoparticles-functionalized Ziegler-Natta catalyst [Volume 11, Issue 2, 2024, Pages 83-93]
  • Qu, Shuzhang Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]

R

  • Rafiee, Roham Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites [Volume 4, Issue 1, 2017, Pages 43-68]
  • Rafiei, Somayeh Correlation of morphology, rheology, and impact strength in compatibilized polypropylene/ polybutadiene rubber thermoplastic vulcanizates [Volume 11, Issue 3, 2024, Pages 137-148]
  • Rahimi, Sajjad Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Rahnama, Mohammadreza Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer [Volume 4, Issue 1, 2017, Pages 137-147]
  • Raj, Aravind Effect of compatibilizer and nanosilica on the mechanical, thermal, and degradation kinetic properties of polypropylene/polylactic acid blends [Volume 11, Issue 1, 2024, Pages 43-59]
  • Ramazani S.A., Ahmad Development of a rheological model for polymeric fluids based on FENE model [Volume 6, Issue 1, 2019, Pages 95-106]
  • Ramedani, Najmaeh Preparation and characterization of a bionanopolymer film for walnut packaging [Volume 6, Issue 2, 2019, Pages 159-167]
  • Ramezanian, Navid Polymerization of methyl methacrylate using bis(imine)cobalt, a polyolefin catalyst [Volume 10, Issue 2, 2023, Pages 79-88]
  • Ramezanian, Navid Determination of gel content of silane cross-linked polyethylene copolymers using FTIR technique [Volume 11, Issue 1, 2024, Pages 1-10]
  • Ramezanian, Navid Homo- and co-polymerization of polar and non-polar olefinic monomers using bicenter cobalt-diimine catalysts [Volume 11, Issue 2, 2024, Pages 125-136]
  • Ranjbarha, Zahra Removal of methylene blue dye from aqueous solutions by a new wood/plastic composite based on HDPE and wood particles [Volume 10, Issue 1, 2023, Pages 27-33]
  • Rasana, Nanoth Nano, micro and multiscale filler-reinforced functionalized polypropylene composites: FTIR characterization and mechanical study [Volume 9, Issue 1, 2022, Pages 33-43]
  • Rashedi, Reza Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Raveshiyan, Saba CO2 absorption through PP/fSiO2 nanocomposite hollow fiber membrane contactor [Volume 9, Issue 1, 2022, Pages 61-71]
  • Razavi, Abbas Editor-in-Chief's Notes [Volume 1, Issue 1, 2014]
  • Razavi, Abbas Editor-in-Chief’s Notes [Volume 1, Issue 2, 2014]
  • Razavi, Abbas Editor-in-chief's note [Volume 2, Issue 1, 2015]
  • Razavi, Abbas Editor-in-Chief's Notes [Volume 2, Issue 2, 2015]
  • Razavi, Abbas Editor-in-Chief's Notes [Volume 3, Issue 1, 2016]
  • Razavi, Abbas Editor-in-Chief's Notes [Volume 3, Issue 2, 2016]
  • Razmjoo, Mahmood Phillips catalysts synthesized over various silica supports: Characterization and their catalytic evaluation in ethylene polymerization [Volume 3, Issue 1, 2016, Pages 23-36]
  • Ren, He Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Ricci, Giovanni Recent advances in the polymerization of butadiene over the last decade [Volume 1, Issue 1, 2014, Pages 43-60]
  • Rimkus, Andrea M. The effect of iodo substituents in bis(phenoxyimine) zirconium complexes on the catalytic performance of homogeneous ethylene polymerization reactions [Volume 5, Issue 2, 2018, Pages 157-165]
  • Rithik, Pachipala Effect of compatibilizer and nanosilica on the mechanical, thermal, and degradation kinetic properties of polypropylene/polylactic acid blends [Volume 11, Issue 1, 2024, Pages 43-59]
  • Ritter, Tanja H. Homogeneous and heterogeneous oligomerization reactions of olefins with unbridged metallocene catalysts [Volume 6, Issue 2, 2019, Pages 107-116]
  • Ritter, Tanja H. Halogen substituted iron(III) di(imino)pyridine complexes as catalysts for 1-pentene/1-hexene co-oligomerization reactions [Volume 7, Issue 2, 2020, Pages 79-89]
  • Roghani-Mamaqani, Hossein Confinement effect of blocks on the morphology of composite particles in co-assembly of block copolymers/homopolymers [Volume 10, Issue 3, 2023, Pages 137-147]
  • Rostami Darounkola, Mohammad Reza Kinetic and microstructural studies of Cp2ZrCl2 and Cp2HfCl2-catalyzed oligomerization of higher α-olefins in mPAO oil base stocks production [Volume 8, Issue 1, 2021, Pages 31-40]
  • Rostamizadeh, Mohammad Selective production of light olefins from methanol over desilicated highly siliceous ZSM-5 nanocatalysts [Volume 5, Issue 1, 2018, Pages 59-70]
  • Rostamizadeh, Mohammad Hydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology [Volume 5, Issue 2, 2018, Pages 97-109]
  • Rostamizadeh, Mohammad Dual-templated synthesis of Si-rich [B]-ZSM-5 for high selective light olefins production from methanol [Volume 8, Issue 2, 2021, Pages 93-103]
  • Ryvkina, Natalia Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method [Volume 4, Issue 1, 2017, Pages 1-12]

S

  • Saber-Tehrani, Mohammad Removal of methylene blue dye from aqueous solutions by a new wood/plastic composite based on HDPE and wood particles [Volume 10, Issue 1, 2023, Pages 27-33]
  • Sacchi, Maria Carmela Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Sadjadi, Samahe Polyolefin and olefin production in Iran: Current and future capacities [Volume 3, Issue 1, 2016, Pages 11-22]
  • Sadr, Lily Nitroxide mediated radical polymerization of styrene from poly(ethylene terephthalate) and its polymer/montmorillonite nanocomposite [Volume 9, Issue 2, 2022, Pages 163-174]
  • Sadri, Minoo Correlation of morphology, rheology, and impact strength in compatibilized polypropylene/ polybutadiene rubber thermoplastic vulcanizates [Volume 11, Issue 3, 2024, Pages 137-148]
  • Saeedi Dehaghani, Amir Hossein Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles [Volume 7, Issue 1, 2020, Pages 13-24]
  • Safinejad, Ali Determination of kinetic parameters for ethylene polymerization (with and without hydrogen) by Ziegler-Natta catalyst [Volume 7, Issue 2, 2020, Pages 121-130]
  • Sagae, Takehiro Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Saito, Masayoshi Characterization of phthalate internal donor in MgCl2 supported Ziegler-Natta catalyst by solid state 13C NMR [Volume 9, Issue 2, 2022, Pages 117-127]
  • Saito, Masayoshi Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Sakuda, Yusuke Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Salami-Kalajahi, Mehdi Optimization of 1,3-butadiene monomer coordination polymerization using response surface methodology (RSM) [Volume 8, Issue 2, 2021, Pages 63-72]
  • Salami-Kalajahi, Mehdi Confinement effect of blocks on the morphology of composite particles in co-assembly of block copolymers/homopolymers [Volume 10, Issue 3, 2023, Pages 137-147]
  • Salehi-Mobarakeh, Hamid Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Salmi, Houda Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods [Volume 10, Issue 3, 2023, Pages 127-136]
  • Santana, Ruth Marlene Biodegradation of PP films modified with organic pro-degradant: natural ageing and biodegradation in soil in respirometric test [Volume 3, Issue 1, 2016, Pages 59-68]
  • Santana, Ruth Marlene Comparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing [Volume 3, Issue 2, 2016, Pages 93-101]
  • Saratovskikh, Stanislav L. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Sardarian, Mehran Simulation and modeling of macro and micro components produced by powder injection molding: A review [Volume 7, Issue 1, 2020, Pages 45-60]
  • Sato, Tsutomu Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Saudi, Mohd Anas Ethylene yield in a large-scale olefin plant utilizing regression analysis [Volume 8, Issue 2, 2021, Pages 105-113]
  • Seesong, Chonticha Competitive effect of calcium lactate and epoxidized soil bean oil on crystallization kinetics of polypropylene [Volume 11, Issue 1, 2024, Pages 29-41]
  • Seifali Abbas-Abadi, Mehrdad Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor [Volume 2, Issue 1, 2015, Pages 39-47]
  • Seifali Abbas-Abadi, Mehrdad Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products [Volume 6, Issue 1, 2019, Pages 43-52]
  • Semikolenova, Nina V. Regulation of molecular weight, molecular weight distribution and branching distribution in polyethylene, produced by supported catalysts bearing bis(imino)pyridyl Fe(II) and N,N-α-diimine Ni(II) complexes [Volume 9, Issue 2, 2022, Pages 103-116]
  • Sergeev, Sergey A. Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization [Volume 4, Issue 1, 2017, Pages 111-122]
  • Seyfollahi Samarin, Mahdi Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 235-251]
  • Shafiei, Fatemeh Correlation of morphology, rheology, and impact strength in compatibilized polypropylene/ polybutadiene rubber thermoplastic vulcanizates [Volume 11, Issue 3, 2024, Pages 137-148]
  • Shahbazi, Mohammad Comparison of grafting of maleic anhydride onto linear low density polyethylene with hexene-1 and butene-1 comonomers and prediction of optimum ingredients by response surface methodology [Volume 8, Issue 1, 2021, Pages 11-19]
  • Shahbazi, Sara Two novel methods for synthesizing poly (propylene fumarate): Technical aspects and role of vacuum and N2 purging effects [Volume 4, Issue 1, 2017, Pages 27-41]
  • Shahrokhinia, Ali The relationship among changes in microstructure, active sites behavior and properties in the propylene polymerization with a 4th generation Ziegler-Natta catalyst [Volume 6, Issue 2, 2019, Pages 139-150]
  • Shahsavari-Badvestani, Tannaz Acceleration of thermo-oxidative degradation of high-density polyethylene using oxidized polyethylene [Volume 10, Issue 3, 2023, Pages 149-157]
  • Shahzamani, Mahnaz Evaluation of photo-aging changes in mechanical properties of HIPS, PS-based binary and compatibilized ternary blends [(Articles in Press)]
  • Shaikh, Aamir Mustafa A study of polypropylene and graphene and their nanocomposites using ANSYS [Volume 11, Issue 3, 2024, Pages 155-166]
  • Shamekhi, Mohammad A. Synthesis of high molecular weight polyethylene using FI catalyst [Volume 1, Issue 1, 2014, Pages 25-32]
  • Sharbafian, Farshad The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers [Volume 2, Issue 2, 2015, Pages 109-119]
  • Sharif, Farhad Exploring the possibility of chemisorption of ethylene on graphene with and without defects [Volume 10, Issue 2, 2023, Pages 101-115]
  • Sharifi, Mohammad Javad Optimization of a new catalyst composition for trimerization of ethylene [Volume 11, Issue 4, 2024, Pages 219-233]
  • Shenavar, Abolfazl Impact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion [Volume 6, Issue 2, 2019, Pages 151-158]
  • Shilov, Gennadii V. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Shinde, Saurabh Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Shokoohi, Shirin Melt free-radical grafting of glycidyl methacrylate (GMA) onto EPDM backbone and effect of EPDM-g-GMA on the morphology and mechanical properties of PS/EPDM/PA6 ternary blends [Volume 8, Issue 1, 2021, Pages 1-9]
  • Shokoohi, Shirin Natural rubber/natural rubber reclaim nanocomposites: Role of functional nanoparticles, mixing sequences and coupling agents [Volume 8, Issue 2, 2021, Pages 115-122]
  • Shokoohi, Shirin Evaluation of photo-aging changes in mechanical properties of HIPS, PS-based binary and compatibilized ternary blends [(Articles in Press)]
  • Shokri, Ahmad-Ali Optimization of 1,3-butadiene monomer coordination polymerization using response surface methodology (RSM) [Volume 8, Issue 2, 2021, Pages 63-72]
  • Shokrollahi, Maryam Controlling the rheological behavior of nucleated polypropylene via incorporating dimethylbenzylidene sorbitol (DMDBS) masterbatch [Volume 10, Issue 1, 2023, Pages 21-26]
  • Sholma, A. V. The influence of magnesium dichloride as support on molecular weights of the polyethylenes produced by Ziegler-Natta catalyst [Volume 11, Issue 4, 2024, Pages 235-242]
  • Soltani, Sedigheh Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber [Volume 3, Issue 2, 2016, Pages 69-77]
  • Somdee, Patcharapon Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites [Volume 11, Issue 4, 2024, Pages 265-275]
  • Song, Minju Molecular dynamics simulation for polyethylene crystallization: Effect of long chain branches [Volume 8, Issue 2, 2021, Pages 73-84]
  • Soudbar, Davood Preparing a modified and promoted homogeneous titanium catalyst for ethylene dimerization to butene-1 [Volume 11, Issue 2, 2024, Pages 103-113]
  • Soudbar, Davood Correlation of morphology, rheology, and impact strength in compatibilized polypropylene/ polybutadiene rubber thermoplastic vulcanizates [Volume 11, Issue 3, 2024, Pages 137-148]
  • Stagnaro, Paola Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Stoiljkovic, Dragoslav Compression, supramolecular organization and free radical polymerization of ethylene gas [Volume 6, Issue 1, 2019, Pages 23-41]
  • Strumia, Miriam Cristina Biobased polyester from soybean oil: Synthesis, characterization and degradation studies [Volume 9, Issue 1, 2022, Pages 45-60]
  • Sudheer, Prathipati Sai Effect of compatibilizer and nanosilica on the mechanical, thermal, and degradation kinetic properties of polypropylene/polylactic acid blends [Volume 11, Issue 1, 2024, Pages 43-59]
  • Suksut, Buncha Competitive effect of calcium lactate and epoxidized soil bean oil on crystallization kinetics of polypropylene [Volume 11, Issue 1, 2024, Pages 29-41]
  • Suksut, Buncha Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites [Volume 11, Issue 4, 2024, Pages 265-275]
  • Sun, Qiaoqiao Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • Sutudehnezhad, Nazila Effects of the nozzle arrangement and aerator configuration in slug bubble production to enhance the foulant removal from a flat sheet membrane bioreactor [Volume 10, Issue 2, 2023, Pages 117-126]

T

  • Taheri, Mostafa Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites [Volume 4, Issue 1, 2017, Pages 43-68]
  • Tajeddin, Behjat Preparation and characterization of a bionanopolymer film for walnut packaging [Volume 6, Issue 2, 2019, Pages 159-167]
  • Tajudin, Suffian Mohamad Radiation shielding characteristics of HDPE/tungsten oxide nanocomposites reinforced with graphene oxide and LDPE using Geant4, XCOM and experiment [Volume 11, Issue 3, 2024, Pages 199-211]
  • Takahashi, Hideyuki Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Talebi, Saeid Optimization of 1,3-butadiene monomer coordination polymerization using response surface methodology (RSM) [Volume 8, Issue 2, 2021, Pages 63-72]
  • Tambe, Pankaj High impact resistant hollow glass microsphere-filled Polypropylene/polyamide 6 blends via reactive compatibilization [Volume 10, Issue 3, 2023, Pages 177-190]
  • Tamri, Zaher Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products [Volume 6, Issue 1, 2019, Pages 43-52]
  • Tanaka, Shohei Origin of catalytic activity differences between phosphine and phosphine oxide-based structures in the water-crosslinkable polyalkoxysilane composition [Volume 8, Issue 1, 2021, Pages 49-62]
  • Taniike, Toshiaki Active site nature of magnesium dichloride-supported titanocene catalysts in olefin polymerization [Volume 2, Issue 1, 2015, Pages 57-63]
  • Taniike, Toshiaki Addition of a second alcohol in magnesium ethoxide synthesis as a way to vary the pore architecture of Ziegler-Natta catalysts [Volume 2, Issue 2, 2015, Pages 65-71]
  • Taniike, Toshiaki Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts [Volume 3, Issue 1, 2016, Pages 47-57]
  • Tanniru, Monica High impact resistant hollow glass microsphere-filled Polypropylene/polyamide 6 blends via reactive compatibilization [Volume 10, Issue 3, 2023, Pages 177-190]
  • Tavakoli, Akram Anti-fouling behaviors of surface functionalized high density polyethylene membrane in microfiltration of bovine serum albumin protein [Volume 4, Issue 1, 2017, Pages 13-26]
  • Tavakoli, Akram CO2 absorption through PP/fSiO2 nanocomposite hollow fiber membrane contactor [Volume 9, Issue 1, 2022, Pages 61-71]
  • Tayano, Takao Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Tayouri, Mohammad Iman Acceleration of thermo-oxidative degradation of high-density polyethylene using oxidized polyethylene [Volume 10, Issue 3, 2023, Pages 149-157]
  • Terano, Minoru Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Terano, Minoru Active site nature of magnesium dichloride-supported titanocene catalysts in olefin polymerization [Volume 2, Issue 1, 2015, Pages 57-63]
  • Terano, Minoru Addition of a second alcohol in magnesium ethoxide synthesis as a way to vary the pore architecture of Ziegler-Natta catalysts [Volume 2, Issue 2, 2015, Pages 65-71]
  • Terano, Minoru Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts [Volume 3, Issue 1, 2016, Pages 47-57]
  • Thakare, Yogeshwar N Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Theurkauff, Gabriel Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Tian, Guanghua Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Tian, Zhou Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 3, Issue 2, 2016, Pages 103-117]
  • Tian, Zhou How can pH value during catalyst preparation affect the performance of vanadium-modified (SiO2/MgO/ MgCl2)•TiClx Ziegler-Natta polyethylene catalysts [Volume 5, Issue 1, 2018, Pages 31-45]
  • Tritto, Incoronata Propene-cycloolefin polymerization [Volume 1, Issue 1, 2014, Pages 61-75]
  • Trivedi, Parthiv M. Ultra-high molecular weight polypropylene (UHMWPP): Synthesis and fiber processing [Volume 11, Issue 1, 2024, Pages 21-28]

U

  • Uchino, Hideshi Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization [Volume 3, Issue 2, 2016, Pages 79-92]
  • Uozumi, Toshiya Characterization of phthalate internal donor in MgCl2 supported Ziegler-Natta catalyst by solid state 13C NMR [Volume 9, Issue 2, 2022, Pages 117-127]

V

  • Vachan, Kedarisetty Sampath Effect of compatibilizer and nanosilica on the mechanical, thermal, and degradation kinetic properties of polypropylene/polylactic acid blends [Volume 11, Issue 1, 2024, Pages 43-59]
  • Valieghbal, Khosrow Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Vantomme, Aurélien Polymerization of sterically hindered a-olefins with single-site group 4 metal catalyst precursors [Volume 4, Issue 1, 2017, Pages 123-136]
  • Vaziri Yazdi, Ali Effect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products [Volume 6, Issue 1, 2019, Pages 43-52]
  • Venkateswaran, Natarajan Magnesium alkoxide precursor to Ziegler-Natta catalyst - emphasis on morphology studies through computer vision approach [Volume 11, Issue 2, 2024, Pages 71-82]
  • Viglianisi, Caterina Macromolecular non-releasing additives for safer food packaging: application to ethylene/α-olefins and propylene based polymers [Volume 1, Issue 1, 2014, Pages 1-15]
  • Vorontsova, Ludmila Viktorovna Ziegler-Natta catalysts for propylene polymerization – Interaction of an external donor with the catalyst [Volume 4, Issue 1, 2017, Pages 87-97]

W

  • Wagenknecht, Udo Influence of annealing on anisotropic crystalline structure of HDPE cast films [Volume 3, Issue 1, 2016, Pages 1-9]
  • Wagenknecht, Udo Thermal behavior of ethylene/1-octene copolymer fractions at high temperatures: Effect of hexyl branch content [Volume 6, Issue 2, 2019, Pages 127-138]
  • Wang, Jie Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Wang, Jieqi Molecular dynamics simulation for polyethylene crystallization: Effect of long chain branches [Volume 8, Issue 2, 2021, Pages 73-84]
  • Wang, Jieqi Molecular dynamics simulation of static crystallization and tensile deformation of bimodal HDPE/UHMWPE: Influence of long chain content [Volume 11, Issue 3, 2024, Pages 167-185]
  • Wang, Wei Monomer effect on the chain transfer by diethyl zinc in olefin polymerization by metallocene catalysts [Volume 8, Issue 2, 2021, Pages 85-91]
  • Wang, Wei Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Wang, Xiaolei Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Wang, Xiong Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Wang, Ying Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Wu, Anyang Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • Wu, Wei Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]

X

  • Xie, Kefeng Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Xin, Shixuan Advances in PNP-ligated rare-earth-metal complexes: Reactivity and catalytic performances [Volume 10, Issue 2, 2023, Pages 89-99]
  • Xing, Qian Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Xu, Shengyuan Substituent effect of Cp2TiCl2 catalyst for ethylene polymerization: A DFT study [Volume 10, Issue 1, 2023, Pages 35-43]
  • Xu, Tao Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]

Y

  • Yadegari, Ali Influence of annealing on anisotropic crystalline structure of HDPE cast films [Volume 3, Issue 1, 2016, Pages 1-9]
  • Yamada, Hiroyuki Chemical state analysis of magnesium-supported Ziegler-Natta catalyst by soft X-ray emission spectrometer (SXES) after contact with alkyl aluminum [Volume 11, Issue 2, 2024, Pages 115-124]
  • Yang, Ji-Xing Synthesis of cyclic olefin polymers with high glass transition temperature and high transparency using tungsten-based catalyst system [Volume 5, Issue 1, 2018, Pages 15-22]
  • Yang, Tingting Synthesizing polypropylene with percolation network catalyzed by inorganic nanoparticles-functionalized Ziegler-Natta catalyst [Volume 11, Issue 2, 2024, Pages 83-93]
  • Yang, Zaixing Effect of 5-ethylidene-2-norbomene or cyclopentene comonomers on the micro-structures, mechanical and dynamic mechanical properties of polydicyclopentadiene [Volume 9, Issue 2, 2022, Pages 139-149]
  • Yang, Zaixing Effect of different catalyst ratios on the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene [Volume 9, Issue 2, 2022, Pages 151-162]
  • Yaripour, Fereydoon Selective production of light olefins from methanol over desilicated highly siliceous ZSM-5 nanocatalysts [Volume 5, Issue 1, 2018, Pages 59-70]
  • Yavari, Rezvan Simulation and modeling of macro and micro components produced by powder injection molding: A review [Volume 7, Issue 1, 2020, Pages 45-60]
  • Yazdanbakhsh, Sohail Determination of gel content of silane cross-linked polyethylene copolymers using FTIR technique [Volume 11, Issue 1, 2024, Pages 1-10]
  • Yeganeh, Hamid Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor [Volume 2, Issue 1, 2015, Pages 39-47]
  • Yegani, Reza Anti-fouling behaviors of surface functionalized high density polyethylene membrane in microfiltration of bovine serum albumin protein [Volume 4, Issue 1, 2017, Pages 13-26]
  • Yegani, Reza Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance [Volume 4, Issue 2, 2017, Pages 175-189]
  • Yegani, Reza Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 201-212]
  • Yegani, Reza Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method [Volume 4, Issue 2, 2017, Pages 235-251]
  • Yegani, Reza Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties [Volume 6, Issue 1, 2019, Pages 63-74]
  • Yegani, Reza CO2 absorption through PP/fSiO2 nanocomposite hollow fiber membrane contactor [Volume 9, Issue 1, 2022, Pages 61-71]
  • Yegani, Reza Effects of the nozzle arrangement and aerator configuration in slug bubble production to enhance the foulant removal from a flat sheet membrane bioreactor [Volume 10, Issue 2, 2023, Pages 117-126]
  • Yoon, Keun-Byoung Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method [Volume 4, Issue 1, 2017, Pages 69-77]
  • Yousefi, Ali Akbar Production of titanium tetrachloride (TiCl4) from titanium ores: A review [Volume 4, Issue 2, 2017, Pages 149-173]
  • Yukhayeva, Guzel Electrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method [Volume 4, Issue 1, 2017, Pages 1-12]

Z

  • Zahmati, Majid Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene [Volume 3, Issue 2, 2016, Pages 135-146]
  • Zakharov, Vladimir A. Kinetics of ethylene polymerization over titanium-magnesium catalysts: The reasons for the observed second order of polymerization rate with respect to ethylene [Volume 2, Issue 1, 2015, Pages 27-38]
  • Zakharov, Vladimir Aleksandrovich Ziegler-Natta catalysts for propylene polymerization – Interaction of an external donor with the catalyst [Volume 4, Issue 1, 2017, Pages 87-97]
  • Zakharov, Vladimir A. Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization [Volume 4, Issue 1, 2017, Pages 111-122]
  • Zakharov, Vladimir A. Regulation of molecular weight, molecular weight distribution and branching distribution in polyethylene, produced by supported catalysts bearing bis(imino)pyridyl Fe(II) and N,N-α-diimine Ni(II) complexes [Volume 9, Issue 2, 2022, Pages 103-116]
  • Zakharov, Vladimir A. The influence of magnesium dichloride as support on molecular weights of the polyethylenes produced by Ziegler-Natta catalyst [Volume 11, Issue 4, 2024, Pages 235-242]
  • Zakharov, Vladimir Aleksandrovich Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Zakria, Mohamad Hafizi Ethylene yield in a large-scale olefin plant utilizing regression analysis [Volume 8, Issue 2, 2021, Pages 105-113]
  • Zakria, Mohamad Hafizi Bin Propylene yield from naphtha pyrolysis cracking using surface response analysis [Volume 9, Issue 1, 2022, Pages 15-24]
  • Zarei, Foroogh Sadat The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers [Volume 2, Issue 2, 2015, Pages 109-119]
  • Zarei, Sara Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation [Volume 7, Issue 2, 2020, Pages 111-119]
  • Zergani, Davood Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles [Volume 7, Issue 1, 2020, Pages 13-24]
  • Zhang, Fan Molecular dynamics simulation of static crystallization and tensile deformation of bimodal HDPE/UHMWPE: Influence of long chain content [Volume 11, Issue 3, 2024, Pages 167-185]
  • Zhang, He-Xin Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method [Volume 4, Issue 1, 2017, Pages 69-77]
  • Zhang, Hongtao Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Zhang, Liaoyun Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Zhang, Minjuan Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Zhang, Rui Insights into the effect of vanadium on chromium-vanadium Phillips catalysts for the ethylene polymerization [Volume 7, Issue 2, 2020, Pages 61-78]
  • Zhang, Shiliang Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Zhang, Taoyi Monomer effect on the chain transfer by diethyl zinc in olefin polymerization by metallocene catalysts [Volume 8, Issue 2, 2021, Pages 85-91]
  • Zhang, Xinyi Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Zhang, Xue-Quan Preparation of high performance PP/ reduced graphene oxide nanocomposites through a combined in situ polymerization and masterbatch method [Volume 4, Issue 1, 2017, Pages 69-77]
  • Zhang, Yongjie Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Zhang, Yu Role of covalent bond formation in morphology and properties of PP/PP-g-PS binary blends [Volume 5, Issue 1, 2018, Pages 85-95]
  • Zhang, Zehan Effect of different catalyst ratios on the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene [Volume 9, Issue 2, 2022, Pages 151-162]
  • Zhao, Li Molecular dynamics simulation for polyethylene crystallization: Effect of long chain branches [Volume 8, Issue 2, 2021, Pages 73-84]
  • Zhao, Ning Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts [Volume 1, Issue 2, 2014, Pages 93-105]
  • Zhao, Ning Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization [Volume 4, Issue 2, 2017, Pages 221-234]
  • Zhao, Ning Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • Zhao, Yangyang Molecular dynamics simulation of static crystallization and tensile deformation of bimodal HDPE/UHMWPE: Influence of long chain content [Volume 11, Issue 3, 2024, Pages 167-185]
  • Zhao, Zenghui Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component [Volume 6, Issue 2, 2019, Pages 117-126]
  • Zhao, Zhijie Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Zharkov, Igor V. Influence of reaction conditions on catalytic properties of rac-Et(2-MeInd)2ZrMe2/(2,6-tBu2PhO-)AliBu2 in ethylene-propylene copolymerization [Volume 10, Issue 4, 2023, Pages 205-210]
  • Zharylganova, Manizha B. Effect of linear low-density polyethylene on the properties of elastomeric materials based on synthetic polyisoprene [Volume 11, Issue 4, 2024, Pages 213-218]
  • Zheng, Cui Copolymerization of ethylene with norbornene by using metallocene/TIBA/B(C6F5)3 system [Volume 10, Issue 2, 2023, Pages 71-77]
  • Zheng, Shuirong Inhibition effect of polyvinyl butyral on crystallization of polypropylene [Volume 5, Issue 2, 2018, Pages 141-151]
  • Zheng, Tao Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Zheng, Yongbiao Finely-tuned strength-toughness balance of PPR/ UHMWPE blends via shear-enhanced crystal orientation and cocrystal-locked UHMPE particles [Volume 11, Issue 3, 2024, Pages 187-198]
  • Zhou, Fei Effect of 5-ethylidene-2-norbomene or cyclopentene comonomers on the micro-structures, mechanical and dynamic mechanical properties of polydicyclopentadiene [Volume 9, Issue 2, 2022, Pages 139-149]
  • Zhou, Fei Effect of different catalyst ratios on the ring-opening metathesis polymerization (ROMP) of dicyclopentadiene [Volume 9, Issue 2, 2022, Pages 151-162]
  • Zhou, Qian Expected nucleation effects of carboxylic acid salts on poly(1-butene) [Volume 3, Issue 1, 2016, Pages 37-45]
  • Zhu, Liang Well-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film [Volume 4, Issue 2, 2017, Pages 191-200]
  • Zhu, Liang Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homopolymerization and ethylene/1-hexene copolymerization [Volume 5, Issue 1, 2018, Pages 1-13]
  • Ziaee, Farshid Synthesis and assessment of the effect of monomer feed ratio and Lewis acids on copolymerization of butyl methacrylate/1-octene [Volume 9, Issue 2, 2022, Pages 85-91]
  • Ziaee, Farshid Novel insight into low-temperature performance of various poly(alkyl methacrylate) homopolymers in lube oil [Volume 10, Issue 3, 2023, Pages 169-175]
  • Ziaee, Farshid Synthesis of novel styrene-olefin triblock copolymer via living anionic polymerization [Volume 11, Issue 2, 2024, Pages 95-101]
  • Zohuri, G. Hossein Synthesis of high molecular weight polyethylene using FI catalyst [Volume 1, Issue 1, 2014, Pages 25-32]
  • Zohuri, Gholam Hossein Polymerization of methyl methacrylate using bis(imine)cobalt, a polyolefin catalyst [Volume 10, Issue 2, 2023, Pages 79-88]
  • Zohuri, Gholam-Hossein Study of Ziegler-Natta/(2-PhInd)2ZrCl2 hybrid catalysts performance in slurry propylene polymerization [Volume 2, Issue 2, 2015, Pages 73-87]
  • Zohuri, Gholam Hossein Determination of gel content of silane cross-linked polyethylene copolymers using FTIR technique [Volume 11, Issue 1, 2024, Pages 1-10]
  • Zohuri, Gholamhossein Optimization of acoustic performance of EPDM-based foams using Taguchi design of experiments: Appropriate content of additives [Volume 10, Issue 4, 2023, Pages 211-224]
  • Zohuri, Gholamhossein Homo- and co-polymerization of polar and non-polar olefinic monomers using bicenter cobalt-diimine catalysts [Volume 11, Issue 2, 2024, Pages 125-136]