Ultra-high molecular weight polyethylene synthesis using externally modified Si-Mg-Ti based Z-N catalyst system

Document Type : Original research

Authors

Reliance Research Development Group, Reliance Industries Ltd., Reliance Corporate Park, Ghansoli, Navi Mumbai, Maharashtra – 400701, India

Abstract

Ultra-high molecular weight polyethylene (UHMWPE) was synthesized using Bi-supported SiO2/MgCl2/TiCl4 (Si-Mg-Ti) Ziegler-Natta catalyst in conjugation with triethyl aluminum (TEA). The impact of temperature and the presence of a chain-terminating agent were examined in the context of ethylene polymerization. The findings showed that as temperature decreases, the activity of the polymerization decreases, and the molecular weight of the polymer increases. Conversely, in the presence of a chain-terminating agent, the molecular weight of the polymer decreases. The introduction of Triethyl borate (TEB) and Tetraethoxy silane (TEOS) as an external donor has a pronounced effect on the catalyst activity, causing a significant decrease, while simultaneously leading to a substantial increase in the viscosity average molecular weight (Mv). Additionally, when a chain-terminating agent is added along with Triethyl borate (TEB) in the system, it results in a significant decrease in molecular weight, albeit with a slight increase in activity compared to a system without a donor. The crystallinity, particle size and bulk density of the polymer synthesized with and without external donor also investigated.

Keywords

Main Subjects

References

  1. Sauter DW, Popoff N, Bashir MA, Szeto KC, Gauvin RM, Delevoye L, Taoufik M, Boisson C (2016) The design of a bipodal bis(pentafluorophenoxy)aluminate supported on silica as an activator for ethylene polymerization using surface organometallic chemistry. Chem Comm 52: 4776-4779 [CrossRef]
  2. Wang X, Han X, Ren F, Xu R, Bai Y (2018) Porous organic polymers-supported metallocene catalysts for ethylene/1-hexene copolymerization. Catalysts 8: 146 [CrossRef]
  3. Sauter DW, Taoufik M, Boisson C (2017) Polyolefins, a success story. Polymers 9: 185 [CrossRef]
  4. Salamone JC, (1996) Polymeric materials encyclopedia, vol.6, CRC, Boca Raton (FL)
  5. Zhu L, He X, Cheng R, Liu Z, Zhao N, Liu B (2018) Effects of Ti/Mg molar ratio on bi-supported SiO2/MgCl2 (ethoxide type)/TiCl4 catalysts in ethylene homo polymerization and ethylene/1-hexene copolymerization. Polyolefins J 5: 1-13 [CrossRef]
  6. Kumawat J, Gupta VK (2020) Fundamental aspects of heterogeneous Ziegler–Natta olefin polymerization catalysis: an experimental and computational overview. Polym Chem 11: 6107- 6128 [CrossRef]
  7. Peacock AJ (2000) Handbook of polyethylene,Marcel & Dekker, New York
  8. Abdul Samad M (2021) Recent advances in UHMWPE/ UHMWPE nanocomposite/UHMWPE hybrid nanocomposite polymer coatings for tribological applications: A comprehensive review. Polymers 13: 608 [CrossRef]
  9. Xiao CF, Zhang YF, An SL, Jia GX (2000) Structural changes of gel drawn, ultra-high molecular weight polyethylene fibers with kerosene as a solvent. Polym Eng Sci 40: 238- 246 [CrossRef]
  10. Smith P, Lemstra PJ, Booij HC (1981) Ultradrawing of high-molecular-weight polyethylene cast from solution. II. Influence of initial polymer concentration. J Polym Sci Pol Phys Ed 19: 877-888 [CrossRef]
  11. Xiao CF, Zhang YF, An SL, Jia G (1996) Investigation on the thermal behaviors and mechanical properties of ultrahigh molecular weight polyethylene (UHMW-PE) fibers. J Appl Polym Sci 59: 931-935 [CrossRef]
  12. Jamjah R, Zohuri GH, Javaheri M, Nekoomanesh M, Ahmadjo S, Farhadi A (2008) Synthesizing UHMWPE Using Ziegler-Natta Catalyst System of MgCl2(ethoxide type)/TiCl4/tri-isobutylaluminum. Macromol Symp 274: 148- 153 [CrossRef]
  13. Zohuri GH, Damavandi S, Ahmadjo S, Sandaroos R, Shamekhi MA (2014) Synthesis of high molecular weight polyethylene using FI catalyst. Polyolefins J 1: 25-32 [CrossRef]
  14. Damavandi S, Samadieh N, Ahmadjo S, Etemadinia Z, Zohuri GH (2015) Novel Ni-based FI catalyst for ethylene polymerization. Euro Polym J 64: 118-125 [CrossRef]
  15. Jones RL, Armoush M (2009) Catalysts for UHMWPE. Macromol Symp 283-284: 88-95 [CrossRef]
  16. Padmanabhan S, Sarma K R, Rupak K, Sharma S (2010) Synthesis of ultra-high molecular weight polyethylene: A differentiate material for specialty applications. Mater Sci Eng B 168: 132-135 [CrossRef]
  17. Zohuri GH, Ahmadi BM, Damavandi S, Eftekhar M, Askari M, Ahmadjo S (2009) Preparation of ultra high molecular weight polyethylene using bi-supported SiO2/MgCl2(spherical)/TiCl4 Catalyst: A morphological study. Iran Polym J 18: 593-600 [CrossRef]
  18. Kaminsky W, Engehausen R, Zoumis K, Spaleck W, Rohrmann J (1992) Standardized polymerizations of ethylene and propene with bridged and unbridged metallocene derivatives: A comparison. Makromol Chem 193: 1643-1651 [CrossRef]
  19. Reddy SS, Sivaram S (1995) Homogeneous metallocene-methylaluminoxane catalyst systems for ethylene polymerization. Prog Polym Sci 20: 309-367 [CrossRef]
  20. Makio H, Terao H, Iwashita A, Fujita T (2011) FI catalysts for olefin polymerization: A comprehensive treatment. Chem Rev 111: 2363- 2449 [CrossRef]
  21. Matsugi T, Fujita T (2008) High-performance olefin polymerization catalysts discovered on the basis of a new catalyst design concept. Chem Soc Rev 37: 1264-1277 [CrossRef]
  22. Chikkali SH, Patel K, Netalkar S, (2017) Insertion or Ziegler–Natta polymerization of olefins. In: Metal-catalyzed polymerization, CRC press, Boca Rotan, 31-115
  23. Wang Y, Fan H, Jie S, Li BG (2014) Synthesis and characterization of titanium (IV) complexes bearing end functionalized biphenyl: Efficient catalysts for synthesizing high molecular weight polyethylene. Inorg Chem Commun 41: 68-71 [CrossRef]
  24. Soga K, Shiono T (1997) Ziegler-Natta catalysts for olefin polymerizations. Prog Polym Sci 22: 1503-1546 [CrossRef]
  25. Liu Z, Zhang H (2022) Ultra-high molecular weight polyethylene: Preparation and applications. J Phys Conf Series 2229: 012006 [CrossRef]
  26. Galli P, Vecellio G (2001) Technology: Driving force behind innovation and growth of polyolefins. Prog Polym Sci 26: 1287-1336 [CrossRef]
  27. Abboud M, Denifl P, Reichert KH (2005) Fragmentation of Ziegler-Natta catalyst particles during propylene polymerization. Macromol Mater Eng 290: 558-564 [CrossRef]
  28. Jamjah R, Zohuri GH, Vaezi J, Ahmadjo S, Nekoomanesh M, Pouryari M (2006) Morphological study of spherical MgCl2.nEtOH supported TiCl4 Ziegler-Natta catalyst for polymerization of ethylene. J Appl Polym Sci 101: 3829-3834 [CrossRef]
  29. Zohuri GH, Jamjah R, Ahmadjo S (2006) Comparative study of propylene polymerization using monosupported and bisupported titanium-based Ziegler–Natta catalysts. J Appl Polym Sci, 100: 2220-2226 [CrossRef]
  30. Barbe PC, Cecchin G, Noristi L (1986) The catalytic system Ti-complex/MgCl2. Adv Polym Sci 81: 1-81 [CrossRef]
  31. Silva FM, Broyer JP, Novat C, Lima EL, Pints JC, Mckenna TF, (2005) Investigation of catalyst fragmentation in gas-phase olefin polymerization: A novel short stop reactor. Macromol Rapid Commun 20: 1846-1853 [CrossRef]
  32. Shaotian W, Liu JC, Make MP, Lee CC (2001) Ethylene polymerization process, US Patent 625,541,5
  33. Galli P, Vecellio G (2004) Polyolefins: The most promising large-volume materials for the 21st J Polym Sci Pol Chem 42: 396-415 [CrossRef]
  34. Fukuda K, Liu B, Nakatani H, Nishiyama I, Yamahiro M, Terano M (2003) Significant variation of molecular weight distribution (MWD) of polyethylene induced by different alkyl-Al co-catalysts using a novel surface functionalized SiO2-supported Ziegler-Natta catalyst. Catal Commun 4: 657-662 [CrossRef]
  35. Zohuri GH, Azimfar F, Jamjah R, Ahmadjo S (2003) Polymerization of propylene using the high-activity Ziegler–Natta catalyst system SiO2/MgCl2 (ethoxide type)/TiCl4/Di-n-butyl phthalate/triethylaluminum/dimethoxy methyl cyclohexyl silane. J Appl Polym Sci 89: 1177- 1181 [CrossRef]
  36. Zohuri GH, Ahmadjo S, Jamjah R, Nekoomanesh M (2001) Structural study of mono and bi-supported Ziegler-Natta catalysts of MgCl2/SiO2/ TiCl4/donor systems. Iran Polym J 10: 149-155 [CrossRef]
  37. Jones RL, Armoush MZ, Harjati T, Elder M, Hummel AA, Sullivan J (2010). Catalysts for UHMWPE and UHMWPE-copolymers. Inorg Chim Acta 364, 275–281 [CrossRef]
  38. Shin YJ, Zhang HX, Yoon KB, Lee D (2010) Preparation of ultra-high molecular weight polyethylene with MgCl2/TiCl4 catalysts: Effect of temperature and pressure. Macromol Res 18: 951–955 [CrossRef]
  39. Zhang HX, Shin YJ, Lee DH, Yoon KB (2011) Preparation of ultra high molecular weight polyethylene with MgCl2/TiCl4 catalyst: effect of internal and external donor on molecular weight and molecular weight distribution. Polym Bull 66: 627-635 [CrossRef]
  40. Zhang HX, Shin YJ, Lee DH, Yoon KB (2012) Preparation of ultra-high molecular weight polyethylene with MgCl2/TiCl4 catalyst: Effect of hydrogen and cocatalyst on molecular weight and molecular weight distribution. Macromol Res 20: 112-115 [CrossRef]
  41. Hasebe K, Fujiwara A, Nozaki T, Miyamoto K (2007) Ultrahigh molecular weight ethene copolymers from metallocene and Ziegler catalysts. Macromol Symp 260: 161-164 [CrossRef]
  42. Kojoh SI, Kioka M, Kashiwa N, Itoh M, Mizuno A (1995) A study of chain-end structures of polypropylene prepared with MgCl2-supported titanium catalyst. Polymer 36: 5015-5018 [CrossRef]
  43. Kojoh SI, Kioka M, Kashiwa N (1999) The influences of cocatalyst on propylene polymerization at high temperature with a MgCl2- supported TiCl4 catalyst system. Eur Polym J 35: 751-755 [CrossRef]
  44. Zohuri G, Jamjah R, Mehtarani R, Nekoomanesh Haghighi M, Ahmadjo S (2003) Slurry polymerization of ethylene using bi-supported Ziegler-Natta catalyst of SiO2/MgCl2(ethoxide type) TiCl4/TEA system. Iran Polym J 12: 31- 36 [CrossRef]
  45. Zhang B, Fu Z, Fan Z, Phiriyawirut P, Charoenchaidet S (2016) Preparation and characterization of high MFR polypropylene and polypropylene/poly (ethylene-co-propylene) in‐reactor alloys. J Polym Sci 133: 42984 [CrossRef]
  46. Kissin YV (2001) Main kinetic features of ethylene polymerization reactions with heterogeneous Ziegler–Natta catalysts in the light of a multicenter reaction mechanism. J Polym Sci Pol Chem 39: 1681-1695 [CrossRef]
  47. Parvez MA, Rahaman M, Suleiman M, Soares JB, Hussein IA (2014) Correlation of polymerization conditions with thermal and mechanical properties of polyethylenes made with Ziegler- Natta catalysts. Int J Polym Sci: 549031 [CrossRef]
  48. Garoff T, Johansson S, Pesonen K, Waldvogel P, Lindgren D (2002) Decrease in activity caused by hydrogen in Ziegler–Natta ethene polymerization. Eur Polym J 38: 121-132 [CrossRef]
  49. Kissin YV, Mink RI, Nowlin TE (1999) Ethylene polymerization reactions with Ziegler–Natta catalysts. I. Ethylene polymerization kinetics and kinetic mechanism. J Polym Sci Pol Chem 37: 4255-4272 [CrossRef]
  50. Chu KJ, Soares JB, Penlidis A (2000) Effect of hydrogen on ethylene polymerization using in-situ supported metallocene catalysts. Macromol Chem Phys 201: 552-557 [CrossRef]
  51. Niyomthai T, Ratchadaphet A, Jongsomjit B, Praserthdam P (2018) Influence of hydrogen on catalytic properties of Ziegler-Natta catalysts prepared by different methods in ethylene polymerization. Adv Polym Tech 37: 1035-1040 [CrossRef]
  52. Czaja K, Białek M (2001) Effect of hydrogen on the ethylene polymerization process over Ziegler– Natta catalysts supported on MgCl2(THF)2. I. Studies of the chain-transfer reaction J Appl Poly Sci 79: 356-360 [CrossRef]
  53. Munoz-Escalona A, Parada A (1979) Factors affecting the nascent structure and morphology of polyethylene obtained by heterogeneous Ziegler-Natta catalysts: 2. Crystallinity and melting behaviour. Polymer 20: 859-866 [CrossRef]
  54. Trivedi PM, Gocher CP, Balachandran V, Gupta VK (2023) Insight of polypropylene synthesis with high performance multidentate internal donor catalyst system. J Appl Polym Sci 140: e53609 [CrossRef]
  55. Sacchi MC, Forlini F, Tritto I, Locatelli P, Morini G, Noristi L, Albizzati E (1996) Polymerization stereochemistry with Ziegler−Natta catalysts containing dialkylpropane diethers: A tool for understanding internal/external donor relationships. Macromolecules 29: 3341-3345 [CrossRef]
  56. Li P, Tu S, Xu T, Fu Z, Fan Z (2015) The influence of combined external donor and combined cocatalyst on propylene polymerization with a MgCl2-supported Ziegler–Natta catalyst in the presence of hydrogen. J Appl Polym Sci 132: 41689 [CrossRef]
  57. Song BG, Ihm SK (2014) The role of two different internal donors (phthalate and 1,3-diether) on the formation of surface structure in MgCl2-supported Ziegler–Natta catalysts and their catalytic performance of propylene polymerization. J Appl Polym Sci 31: 40536 [CrossRef]
  58. Zhang H-X, Lee Y-J, Park J-R, Lee D-H, Yoon K-B, (2011) Control of molecular weight distribution for polypropylene obtained by commercial Ziegler-Natta catalyst: Effect of electron donor. Macromol Res 19: 622-628 [CrossRef]
  59. Niyomthai T, Jongsomjit B, Praserthdam P (2017) Investigation of Alkoxysilanes in the Presence of Hydrogen with Ziegler-Natta Catalysts in Ethylene Polymerization. Eng J 21: 171-180 [CrossRef]
  60. Thongdonjui A, Trakarnpruk W, Strauss RH (2009) Effect of Electron Donor on PE Polymerization. J Met Mater Miner 19: 17-23 [CrossRef]

Files

History

  • Receive Date: 26 August 2023
  • Revise Date: 30 November 2023
  • Accept Date: 01 December 2023
  • First Publish Date: 01 December 2023

Share

How to cite

Statistics