With the collaboration of Iran Polymer Society

Document Type : Original research

Authors

1 Department of Biomedical Engineering, Iran polymer and petrochemical institute

2 Department of Polymer Science, Iran Polymer and Petrochemical Institute, Tehran, Iran

Abstract

In this study, well-defined α-methyl styrene – olefin triblock copolymers were synthesized via living anionic polymerization using alkyl lithium as an initiator and 1,12-dibromododecane as a coupling agent. The polymerization was conducted in cyclohexane under an inert atmosphere at moderate temperature, allowing for precise control over the molecular architecture and narrow molecular weight distribution. Gel permeation chromatography (GPC) revealed monomodal elution curves with dispersity values close to unity, confirming the living nature of the polymerization process and the high structural homogeneity of the resulting copolymers. Structural characterization was performed using 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. The 1H NMR spectra confirmed the successful formation of block copolymers through the identification of characteristic chemical shifts corresponding to the initiator, αMS blocks, and central dodecane units. Notably, the absence of brominated end-groups in the spectrum supports complete coupling and high end-group fidelity. Furthermore, 13C NMR analysis revealed well-defined chemical shifts associated with aromatic, methine, and methylene carbons. The disappearance of signals corresponding to bromine-bound methylene carbons confirmed the full consumption of the coupling agent and the effective formation of the triblock structure. These findings validate the successful synthesis of αMS-based triblock copolymers with a high degree of control over molecular parameters, establishing a robust foundation for tailoring thermomechanical and morphological properties for advanced material applications.

Keywords

Main Subjects

  1. Kim DB, Jung J, Jang WJ, Kim JM, Park M, Kang B (2025) Precision synthesis of thermally crosslinkable hole-transporting block copolymers via living anionic polymerization for solution-processable organic light-emitting diodes. Eur Polym J 223: 113627 [CrossRef]
  2. Okamoto K, Yoo D, Yoshioka R, Yoshioka R, Nakasato R, Ashikari Y, Kitayama K, Nagaki A (2025) Sequence-defined synthesis enabled by fast and living anionic monoaddition of vinyl monomers. Angew Chem Int Ed 64: e202416875 [CrossRef]
  3. Babula P, Kozak R, Schab‐Balcerzak E (2025) Synthesis and characterization of anionic polymerization initiator from functional styrene derivative. J Appl Polym Sci 142: e56409 [CrossRef]
  4. Dai Q, Fu Y, Tan H, Zhang Y, Yang Y, Xu J, Yi W, Tan R, Liu K, Li L, Yang Z (2024) Living anionic copolymerization of 1,3-pentadiene isomers with alpha-methylstyrene in the presence of 2,2-di(2-tetrahydrofuryl)propane. Polymer 312: 127629 [CrossRef]
  5. Jozaghkar M, Ziaee F, (2024) Characterization and kinetics study of poly (α-methyl styrene) synthesized by living anionic polymerization. J Polym Res 31: 156 [CrossRef]
  6. Hahn C, Rauschenbach M, Frey H (2023) Merging styrene and diene structures to a cyclic diene: Anionic polymerization of 1‐vinylcyclohexene (VCH). Angew Chem Int Ed 62: e202302907 [CrossRef]
  7. Jozaghkar M, Ziaee F, (2024) Synthesis of novel styrene-olefin triblock copolymer via living anionic polymerization. Polyolefins J 11: 95-101 [CrossRef]
  8. Zhang T, Conrad ED, Gates DP (2022) Di- and tri-block copolymers from the sequential living anionic copolymerization a phosphaalkene with styrene. Polymer 249: 124831 [CrossRef]
  9. Zhang Y, Zhang Z, Zhao H, Yang X, Jin Y, Wu Y (2025) Sulfonated Poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene) Copolymers for Advanced Proton Exchange Membranes. Chinese J Polym Sci 43: 1537-1548 [CrossRef]
  10. Li T, Zhang M, He J, Ni P (2024) Synthesis and Characterization of Graft Copolymers with Poly(ε-caprolactone) Side Chain Using Hydroxylated Poly(β-myrcene-co-α-methyl styrene). Molecules 29: 2363 [CrossRef]
  11. Cao C, Qian S, Cao G, Yan J, Gao P, Ji S (Year not available) A new α-CBC polymer with elevated heat-resistance prepared via catalytic hydrogenation of α-methylstyrene-butadiene-styrene terpolymer over Ni x Pd/NCNT@MFN monolithic catalyst. J Polym Res [CrossRef]
  12. Do Q, Yamaguchi M, Tada T, Doan VA (2025) Segregation behavior of a tackifier in styrene-butadiene rubber under a temperature gradient. Polymer J 57: 1025-1032 [CrossRef]
  13. Upadhyay P, Mishra S, Sharma J, Mishra S, Kulshrestha V (2024) Quaternized poly(vinyl toluene-co-α-methyl styrene)/poly(vinyl alcohol) interpenetrating anion exchange membrane for efficient acid reclamation. J Environ Chem Eng 12: 112252 [CrossRef]
  14. Jozaghkar M, Ziaee F, Ardakani H, Ashenagar S, Jalilian M, (2019) Kinetics of high-temperature bulk thermal polymerization of methyl styrene. Iran J Polym Sci Technol, 32, pp.227-240 [CrossRef]
  15. Cao C, Qian S, Cao G, Yan J, Gao P, Ji S (2024) A new α-CBC polymer with elevated heat-resistance prepared via catalytic hydrogenation of α-methylstyrene-butadiene-styrene terpolymer over NixPd/NCNT@MFN monolithic catalyst. J Polym Res 31: 187 [CrossRef]
  16. Serna S, Wang T, Torkelson JM (2024) Eliminating the Tg-confinement and fragility-confinement effects in poly(4-methylstyrene) films by incorporation of 3 mol  % 2-ethylheyxl acrylate comonomer. J Chem Phys 160: 034903 [CrossRef]
  17. Jozaghkar MR, Jahani Y, Arabi H, Ziaee F (2019) Effect of Polyethylene Molecular Architecture on the Dynamic Viscoelastic Behavior of Polyethylene/Polyhexene-1 Blends and Its Correlation with Morphology. Polym-Plast Technol Mater 58: 560-572 [CrossRef]
  18. Ercan N, Korkmaz E (2024) Rheological, morphological and solid-state viscoelastic properties of ethylene vinyl acetate copolymer/olefin block copolymer (EVA/OBC) blends. Polym Bull 81: 4993-5010 [CrossRef]
  19. Madruga E (2002) From classical to living/controlled statistical free-radical copolymerization. Prog Polym Sci 27: 1879-1924 [CrossRef]
  20. Zheng K, He JP (2019) Amphiphilic dendrimer-like copolymers with high chain density by living anionic polymerization. Chinese J Polym Sci 37:875-883 [CrossRef]
  21. Takahata K, Uchida S, Goseki R, Ishizone T (2019) Synthesis of chain end acyl-functionalized polymers by living anionic polymerization: versatile precursors for H-shaped polymers. Polym Chem 10: 3951-3959 [CrossRef]
  22. Li C, Han L, Bai H, Wang X, Yin Y, Yan H, Zhang X, Yang Z, Liu P, Ma H (2021) Manipulating Molecular Weight Distributions via “Locked–Unlocked” Anionic Polymerization. Macromolecules 54: 8470-8477 [CrossRef]
  23. Jozaghkar MR, Ziaee F, Jalilian S (2022) Synthesis, kinetic study and characterization of living anionic polymerized polystyrene in cyclohexane. Iran Polym J 31: 399-412 [CrossRef]
  24. Dunn AS (1994) Introduction to physical polymer science (2nd edition). By L. H. Sperling, New York, 1992 John Wiley & Sons Inc. John Wiley & Sons Inc., New York, 1992.
  25. Jozaghkar MR, Ziaee F, Azar AS (2021) Investigation of poly(α-methyl styrene) tacticity synthesized by photo-polymerization. Polym Bull 78: 5303-5314 [CrossRef]
  26. Izunobi JU, Higginbotham CL (2011) Polymer Molecular Weight Analysis by 1H NMR spectroscopy. J Chem Education 88: 1098-1104 [CrossRef]
  27. Parthiban E, Sudarsan S, Charles A, Mohan S, Kumar A, Kistan A (2025) Synthesis and characterization of thermal properties of poly(p-cumylphenyl methacrylate-co-methoxyethyl methacrylate) copolymers. J Molecul Struct 1324: 140890 [CrossRef]