Composites and nanocomposites
Tohid Abdolahzadeh; Jalil Morshedian; Shervin Ahmadi
Abstract
Researchers have studied the possibility of various polymer composites for radiation shielding applications. Lightness and non-toxicity of these materials are their significant advantages compared to Pb base traditional and common shields. In this research, polyethylene (HDPE)-based composites for shielding ...
Read More
Researchers have studied the possibility of various polymer composites for radiation shielding applications. Lightness and non-toxicity of these materials are their significant advantages compared to Pb base traditional and common shields. In this research, polyethylene (HDPE)-based composites for shielding against X-ray radiations were prepared by utilizing several weight fractions of the nano tungsten oxide, bismuth oxide, and barium sulfate, which were decorated on nanographene oxide (10, 15, 20, and 25 wt%). The linear and mass attenuation coefficient values of samples were investigated experimentally with an X-ray tube at radiology energy ranges and estimated theoretically by using MCNP code (Mont Carlo Nanoparticle program). Results illustrate that by increasing the nanoparticles content, the linear attenuation coefficient parameter and the absorbed dose values increased dramatically. The shielding efficiency of the prepared samples has been shown by measuring the HVL values. Furthermore, the effect of sample thicknesses on the attenuation properties of nanocomposites was studied in this research. The morphological properties of the samples were evaluated with SEM. The collected results showed that the particle size of the nanoparticles used has a uniform dispersion in the polymer matrix. The mechanical properties of nanocomposite samples were characterized by DMTA and tensile test. Nanocomposites containing 20% and 25% of tungsten oxide and bismuth oxide particles reached to 88% and 90% dose absorption, respectively.
Catalysis
Lei Cui; Ji-Xing Yang; Yan-Guo Li; Yue-Sheng Li
Abstract
Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefins, tricyclodipentadiene (TCPD) and tricyclo[6.4.0.19,12]-tridec-10-ene (TTE), with high glass transition temperature (Tg), excellent thermal stability, and high transparency, have been synthesized by ring-opening metathesis polymerization ...
Read More
Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefins, tricyclodipentadiene (TCPD) and tricyclo[6.4.0.19,12]-tridec-10-ene (TTE), with high glass transition temperature (Tg), excellent thermal stability, and high transparency, have been synthesized by ring-opening metathesis polymerization (ROMP) and subsequent hydrogenation. ROMP of TCPD and TTE was carried out successfully without gel formation using a WCl6/i-Bu3Al/Et-OH/hexene catalyst system at room temperature. By changing the TCPD/TTE molar ratio, the optimized catalyst component ratio for the polymerization varied. Chemical structures of the unsaturated and hydrogenated polymers were characterized by 1H NMR technique. Thermal properties of these newly synthesized polymers were determined using TGA and DSC measurements. The degradation temperatures (Td) were all above 420°C in N2, indicating that all these copolymers had excellent thermal stability. After hydrogenation, Tg of ROMP polymers was decreased by 30-60°C. The Tg of h-pTCPD reached as high as about 230°C. The light transmittances of these polymer films were also analyzed using UV-Vis absorption spectroscopy. A high light transmittance of up to 92% was found by UV-Vis absorption spectra for these polymer films.
