Tuning the short chain branch distribution of ethylene and 1-hexene copolymers by SiO2-supported silyl chromate catalyst with different Al-alkyl co-catalysts

Document Type : Original research

Authors

1 State Key Laboratory of Chemical Engineering, East China University of Science and Technology, No.130 Meilong Road, Xuhui District, Shanghai, 200237, China

2 School of Materials Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292, Japan

Abstract

SiO2-supported silyl chromate catalyst is an important industrial catalyst for production of high grade HDPE pipe materials. The control of the short chain branch (SCB) distribution using this catalyst system is still a great challenge. In this work, ethylene and 1-hexene copolymers were synthesized using SiO2-supported silyl chromate catalyst combined with triisobutylaluminium (TIBA), triethylaluminium (TEA) and mixed TIBA/TEA at molar ratio 1:1 (TIBA/TEA/1:1) as three different Al-alkyl co-catalysts.The temperature rising elution fractionation (TREF) and successive self-nucleation and annealing (SSA, by DSC) methods were combined to analyze the short chain branch distribution (SCBD) of these ethylene/1-hexene copolymers. The results showed that different types of co-catalyst had a great influence on SCBD of ethylene/1-hexene copolymers. The copolymer produced with TIBA showed better SCBD than the copolymer produced with TEA, and the copolymer produced with TIBA/ TEA/1:1 showed a SCBD in between those with TIBA and TEA.

Keywords

Main Subjects

References

  1. Kissin YV, Brandolini AJ (2008) Chemistry of olefin polymerization reactions with chromium-based catalysts. J Polym Sci, Part A: Polym Chem 46: 5330-5347
  2. Hogan JP, Banks RL (1958) Stabilized catalyst and improved polymerization process. Phillips Petroleum Co.,US Patent 2846425
  3. Hogan JP (1970) Ethylene polymerization catalysis over chromium oxide. J Polym Sci, Part A: Polym Chem 8: 2637-2652
  4. McDaniel MP (1985) Supported chromium catalysts for ethylene polymerization. Advances in Catalysis.1st ed., Academic Press, 47-98
  5. McDaniel MP (2008) Polymerization reaction. in Handbook of heterogeneous catalysis. 1st ed., Wiley-VCH, 3733-3792
  6. McDaniel MP (2010) A review of the Phillips supported chromium catalyst and its commercial use for ethylene polymerization. Advances in Catalysis, 1st ed., Academic Press, 123-606
  7. Groppo E, Lamberti C, Bordiga S, Spoto G, Zecchina A (2005) The structure of active centers and the ethylene polymerization mechanism on the Cr/SiO2 catalyst: A frontier for the characterization methods. Chem Rev 105: 115- 183
  8. Cheng RH, Liu Z, Zhong L, He XL, Qiu PY, Terano M, Eisen MS, Scott SL, Liu BP (2013) Phillips Cr/silica catalyst for ethylene polymerization, “Polyolefins: 50 years after Ziegler and Natta”. Adv Polym Sci 257: 135-202
  9. Carrick WL, Turbett RJ, Karol FJ, Karapinka GL, Fox AS, Johnson RN (1972) Ethylene polymerization with supported bis(triphenylsilyl) chromate catalysts. J Polym Sci, Part A: Polym Chem 10: 2609-2620
  10. Gaspar AB, Martins RL, Schmal M, Dieguez LC (2001) Characterization of Cr2+ and ethylene polymerization on Cr/SiO2 catalysts. J Mol Catal, Part A: Chem 169: 105-112
  11. Gaspar AB, Dieguez LC (2002) The influence of Cr precursors in the ethylene polymerization on Cr/SiO2 catalysts. Appl Catal, Part A: Gen 227: 241-254
  12. Cann K, Apecetche M, Zhang MH (2004) Comparison of silyl chromate and chromium oxide based olefin polymerization catalysts. Macromol Symp 213: 29-36
  13. Kennedy MA, Peacock AJ, Mandelkern L (1994) Tensile properties of crystalline polymers: Linear polyethylene. Macromolecules 27: 5297-5310
  14. Jordens K, Wilkes GL, Janzen J, Rohlfing DC, Welch MB (2000) The influence of molecular weight and thermal history on the thermal, rheological, and mechanical properties of metallocene-catalyzed linear polyethylenes. Polymer 41: 7175-7192
  15. Fan YD, Xue YH, Nie W, Ji XL, Bo SQ (2009) Characterization of the microstructure of bimodal HDPE resin. Polym J 41: 622-628
  16. Mortazavi SMM, Arabi H, Zohuri G, Ahmadjo S, Nekoomanesh M, Ahmadi M (2010) Copolymerization of ethylene/α-olefins using bis(2-phenylindenyl) zirconium dichloride metallocene catalyst: structural study of comonomer distribution. Polym Int 59: 1258- 1265
  17. Garcia RA, Carrero A, Aroca M, Prieto O, Dominguez C (2008) Slow crack growth resistance in resin blends of chromium and metallocene catalyzed ethylene-hexene copolymers for pipe applications. Polym Eng Sci 48: 925-933
  18. Keating M, Lee IH, Wong CS (1996) Thermal fractionation of ethylene polymers in packaging applications. Thermochim Acta 284: 47-56
  19. Chen F, Shanks RA, Amarasinghe G (2001) Crystallisation of single-site polyethylene blends investigated by thermal fractionation techniques. Polymer 42: 4579-4587
  20. Zhang SL, Zhao N, Wu YX, Dong Q, Wang QT, Tang Y, Yu YL, Da JW, He XL, Cheng RH, Liu BP (2012) Short chain branches distribution characterization of ethylene/1-hexene copolymers by using TREF+13C-NMR and TREF+SC methods. Macromol Symp 312: 63-71
  21. Czaja K, Bialek M, Utrata A (2004) Copolymerization of ethylene with 1-hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran. J Polym Sci, Part A: Polym Chem 42: 2512-2519
  22. Neves CJ, Monteiro E, Habert AC (1993) Characterization of fractionated LLDPE by DSC, FTIR, and SEC. J Appl Polym Sci 50: 817-824
  23. Hosoda S, Uemura A (1992) Effect of the structural distribution on the mechanical properties of linear low-density polyethylenes. Polym J 24: 939-949
  24. Adisson E, Ribeiro M, Deffieux A, Fontanille M (1992) Evaluation of the heterogeneity in linear low-density polyethylene comonomer unit distribution by differential scanning calorimetry characterization of thermally treated samples. Polymer 33: 4337-4342
  25. Hosoda S (1988) Structural distribution of linear low-density polyethylenes. Polym J 20: 383-397
  26. Müller AJ, Hernández ZH, Arnal ML, Sánchez JJ (1997) Successive self-nucleation/annealing (SSA): A novel technique to study molecular segregation during crystallization. Polym Bull 39: 465-472
  27. Müller AJ, Arnal ML (2005) Thermal fractionation of polymers. Prog Polym Sci 30: 559-603
  28. Zhao N, Cheng RH, He XL, Liu Z, Liu BP (2014) A novel SiO2-supported Cr-V bimetallic catalyst making polyethylene and ethylene/1- hexene copolymers with bimodal molecular weight distribution. Macromol Chem Phys,DOI: 10.1002/macp.201400094
  29. Tanem BS, Stori A (2001) Blends of single-site linear and branched polyethylene. I. Thermal characterization. Polymer 42: 5389-5399
  30. Xia W, Liu BP, Fang YW, Hasebe K, Terano M (2006) Unique polymerization kinetics obtained from simultaneous interaction of Phillips Cr(VI) Ox/SiO2 catalyst with Al-alkyl cocatalyst and ethylene monomer. J Mol Catal, Part A: Chem 256: 301-308
  31. Lorenzo AT, Arnal ML, Müller AJ, Boschetti de Fierro A, Abetz V (2006) High speed SSA thermal fractionation and limitations to the determination of lamellar sizes and their distributions. Macromol Chem Phys 207: 39-49
  32. Stadler FJ, Gabriel C, Muenstedt H (2007) Influence of short-chain branching of poly-ethylenes on the temperature dependence of rheological properties in shear. Macromol Chem Phys 208: 2449-2454
  33. Luruli N, Pijpers T, Brull R, Grumel V, Pasch H, Mathot V (2007) Fractionation of ethylene/1- pentene copolymers using a combination of SEC-FTIR and SEC-HPer DSC. J Polym Sci, Part B: Polym Phys 45: 2956-2965
  34. Soares JB, Abbott RF, Kim JD (2000) Environmental stress cracking resistance of polyethylene: The use of CRYSTAF and SEC to establish structure–property relationships. J. Polym Sci, Part B: Polym Phys 38: 1267-1275
  35. Hubert L, David L, Séguéla R, Vigier G, Degoulet C, Germain Y(2001) Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. I. Microstructure and crystallisation kinetics. Polymer 42: 8425-8434
  36. Hubert L, David L, Séguéla R, Vigier G, Corfias- Zuccalli C, Germain Y (2002) Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. II. Short-term creep of isotropic and drawn materials. J Appl Polym Sci 84: 2308-2317
  37. DesLauriers PJ, McDaniel MP, Rohlfing DC, Krishnaswamy RK, Secora S. J., Benham EA, Maeger PL, Wolfe AR, Sukhadia AM, Beaulieu BB (2005) A comparative study of multimodal vs. bimodal polyethylene pipe resins for PE-100 applications. Polym Eng Sci 45: 1203-1213
  38. DesLauriers PJ, McDaniel MP (2007) Short chain branching profiles in polyethylene from the Phillips Cr/silica catalyst. J Polym Sci, Part A: Polym Chem 45: 3135-3149
  39. Krishnaswamy RK, Yang Q, Fernandez-Ballester L, Kornfield JA (2008) Effect of the distribution of short-chain branches on crystallization kinetics and mechanical properties of high-density polyethylene. Macromolecules 41: 1693-1704
  40. Zhang SL, Cheng RH, Dong Q, He XL, Wang QT, Tang Y, Yu YL, Xie K, Da JW, Terano M, Liu BP (2013) Ethylene/1-hexene copolymerization with a novel SiO2-supported inorganic and organic hybrid chromium-based catalyst. Macromol React Engi 7: 254-266
  41. Galland G.B, Mauler RS, Da Silva LP, Liberman S, Da Silva AA, Quijada R (2002) Study of the influence of the reaction parameters on the composition of the metallocene-catalyzed ethylene copolymers using temperature rising elution fractionation and 13C nuclear magnetic resonance. J Appl Polym Sci 84: 155-163
  42. Wang WJ, Kolodka E, Zhu SP, Hamielec AE, Kostanski LK (1999) Temperature rising elution fractionation and characterization of ethylene/octene-1 copolymers synthesized with constrained geometry catalyst. Macromol Chem Phys 200: 2146-2151
  43. Xu JT, Feng LX (2000) Application of temperature rising elution fractionation in polyolefins. Eur Polym J 36: 867-878
  44. Starck P, Rajanen K, Löfgren B (2002) Comparative studies of ethylene–α-olefin copolymers by thermal fractionations and temperature-dependent crystallinity measurements. Thermochim Acta 395: 169-181
  45. Kong J, Fan XD, Xie YC, Qiao WQ (2004) Study on molecular chain heterogeneity of linear low-density polyethylene by cross-fractionation of temperature rising elution fractionation and successive self-nucleation/annealing thermal fractionation. J Appl Polym Sci 94: 1710-1718
  46. Assumption HJ, Vermeulen JP, Jarrett WL, Mathias LJ, van Reenen AJ (2006) High resolution solution and solid state NMR characterization of ethylene/1-butene and ethylene/1-hexene copolymers fractionated by preparative temperature rising elution fractionation. Polymer 47: 67-74
  47. Sarzotti DM, Soares JBP, Simon LC, Britto LJD (2004) Analysis of the chemical composition distribution of ethylene/α-olefin copolymers by solution differential scanning calorimetry: An alternative technique to Crystaf. Polymer 45: 4787-4799
  48. Czaja K, Bialek M, Utrata A (2004) Copolymerization of ethylene with 1-hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran. J Polym Sci, Part A: Polym Chem 42: 2512-2519
  49. Neves CJ, Monteiro E, Habert AC (1993) Characterization of fractionated LLDPE by DSC, FTIR, and SEC. J Appl Polym Sci 50: 817-824
  50. Hosoda S, Uemura A (1992) Effect of the structural distribution on the mechanical properties of linear low-density polyethylenes. Polym J 24: 939-949
  51. Adisson E, Ribeiro M, Deffieux A, Fontanille M (1992) Evaluation of the heterogeneity in linear low-density polyethylene comonomer unit distribution by differential scanning calorimetry characterization of thermally treated samples. Polymer 33: 4337-4342
  52. Hosoda S (1988) Structural distribution of linear low-density polyethylenes. Polym J 20: 383-397
  53. Müller AJ, Hernández ZH, Arnal ML, Sánchez JJ (1997) Successive self-nucleation/annealing (SSA): A novel technique to study molecular segregation during crystallization. Polym Bull 39: 465-472
  54. Müller AJ, Arnal ML (2005) Thermal fractionation of polymers. Prog Polym Sci 30: 559-603
  55. Zhao N, Cheng RH, He XL, Liu Z, Liu BP (2014) A novel SiO2-supported Cr-V bimetallic catalyst making polyethylene and ethylene/1- hexene copolymers with bimodal molecular weight distribution. Macromol Chem Phys,DOI: 10.1002/macp.201400094
  56. Tanem BS, Stori A (2001) Blends of single-site linear and branched polyethylene. I. Thermal characterization. Polymer 42: 5389-5399
  57. Xia W, Liu BP, Fang YW, Hasebe K, Terano M (2006) Unique polymerization kinetics obtained from simultaneous interaction of Phillips Cr(VI) Ox/SiO2 catalyst with Al-alkyl cocatalyst and ethylene monomer. J Mol Catal, Part A: Chem 256: 301-308
  58. Lorenzo AT, Arnal ML, Müller AJ, Boschetti de Fierro A, Abetz V (2006) High speed SSA thermal fractionation and limitations to the determination of lamellar sizes and their distributions. Macromol Chem Phys 207: 39-49
Polyolefins Journal
Volume 1, Issue 2 - Serial Number 2
December 2014
Pages 93-105

Files

History

  • Receive Date: 06 December 2013
  • Revise Date: 03 May 2014
  • Accept Date: 25 May 2014

Share

How to cite

Statistics