Olefin polymerization and copolymerization
Virendrakumar. Gupta; Hiren Manojkumar Bhajiwala
Abstract
The copolymerization of methyl acrylate (MA) and glycidyl methacrylate (GMA) with 1-hexene was carried out using activator regenerator by electron transfer atom transfer radical polymerization (ARGET ATRP) employing Cu(0)/CuBr2 as a catalyst, pentamethyl diethylenetriamine (PMDETA) as a ligand, and ethyl ...
Read More
The copolymerization of methyl acrylate (MA) and glycidyl methacrylate (GMA) with 1-hexene was carried out using activator regenerator by electron transfer atom transfer radical polymerization (ARGET ATRP) employing Cu(0)/CuBr2 as a catalyst, pentamethyl diethylenetriamine (PMDETA) as a ligand, and ethyl 2-bromoisopropionate (EBriP) as the initiator, all at a reaction temperature of 70°C. This process resulted in the production of viscous and transparent copolymers, namely poly (methyl acrylate-co-1-hexene) or PMH and poly (glycidyl methacrylate-co- 1-hexene) or PGMH. For the MA/1-Hex copolymer, conversion rates ranged from a maximum of 31 wt.% to a minimum of 12 wt.%, while the GMA/1-hexene copolymer exhibited conversion rates ranging from a maximum of 42 wt.% to a minimum of 12 wt.%. It was observed that increasing the amount of 1-hexene during the synthesis led to a higher incorporation of 1-hexene content in both the MA and GMA polymer backbones, with a maximum of 15 wt.% and 18 wt.% of 1-hexene being incorporated into PMH and PGMH, respectively. The incorporation of 1-hexene was confirmed through Nuclear Magnetic Resonance (NMR) studies, including 1H, 13C, and DEPT 135 studies. Additionally, the copolymer PMH and PGMH exhibited monomodal molecular weight distribution curves when evaluated using the size exclusion chromatography (SEC) high-performance liquid chromatography (HPLC) technique, with polydispersity values in the range of 1.19-1.37 and 1.07-1.11, respectively. These findings indicate that the copolymerization process was well-controlled and followed a radical polymerization mechanism.
Characterization
Marzie Alidadi-Shamsabadi; Shirin Shokoohi
Abstract
Melt free-radical grafting reactions between ethylene-propylene-dieneterpolymer (EPDM) and glycidyl methacrylate (GMA) were investigated in a batch mixer (170°C, 60rpm). Effect of dicumylperoxide (DCP) initiator and GMA functionalizing monomer concentrations was studied on the grafted EPDM characteristics. ...
Read More
Melt free-radical grafting reactions between ethylene-propylene-dieneterpolymer (EPDM) and glycidyl methacrylate (GMA) were investigated in a batch mixer (170°C, 60rpm). Effect of dicumylperoxide (DCP) initiator and GMA functionalizing monomer concentrations was studied on the grafted EPDM characteristics. Titration results indicated an increase in the graft degree (GD) and gel content (GC) values with increasing DCP concentration as a result of increasing primary free radical concentration and strengthening cross-linking side reaction. FTIR spectrums confirmed that GMA functionalities have been grafted onto EPDM with appearing carbonyl (C=O) peak. After that, the resultant EPDM-g-GMA was used as compatibilizer in PS(polystyrene)/EPDM/PA6 (polyamide6) ternary blends. The effect of rubbery compatibilizer on the blend morphology and mechanical properties was studied. The ATR-FTIR spectra of ternary blends, etched to remove unreacted PA6, demonstrated that the compatibilizing reactions occurred during melt blending. By investigating the SEM micrographs it was revealed that the EPDM-g-GMA compatibilizer at the concentration range of 5 wt.% to 15 wt.% changed the size and type of the blend morphology from separated dispersed to multicore-shell morphology. The finest morphology was achieved by using 7.5 wt.% EPDM-g-GMA. Also, the presence of compatibilizer up to 7.5 wt.% could improve the tensile modulus, yield stress and impact strength, but a decreasing trend was observed at higher concentration of the compatibilizer.
